Needle types and sizes
#1
Member
Thread Starter
Join Date: May 2011
Location: Portland, OR
Posts: 93
Hi all, I am still confused. I don't know what type and size of needle to use when piecing a quilt. Also would like to know favorite threads. I have been using one from my LQS that is 100% cotton with a silk finish. Any help on this for my confused mind will be greatly appreciated. I guess I should also say, machine needles, not hand quilting. Thanks again
#2
With needles, the higher the number, the "wider" (or larger in circumference) the needle. What size you need to piece with depends upon what type of fabric you are piecing. A simple Google search on the 3 words "needle size quilting" brings up this wonderful site. Everything you will need to know and more.
http://www.generations-quilt-pattern...dle-guide.html
http://www.generations-quilt-pattern...dle-guide.html
#6
I like to use the smallest needle size that makes the proper stitch with the thread I'm using.
I usually use 50wt or 60wt thread (or a polyester equivalent) for piecing and the needles that work best with those sizes is probably going to be a 10, 11 or 12.
I use a variety of threads for quilting - if I'm using Bottom Line in the needle, I use a size 9 or 10 needle for quilting. If I'm using a 40wt thread (or the poly equivalent) I use a 12 or 14 needle. If I'm using a 30wt thread or larger, I use a 14 or 16 needle - or even larger, just depending upon what it takes to form nice stitches with the combination of fabrics and batt and thread.
I buy ordinary 15x1 sharp needles by the hundred on eBay for $12-15 per hundred - Organ and Orange brands are both very low-priced but high quality.
If I need specialty needles like twins or wings or topstitching, I need to go to one of the more expensive brands, like Schmetz or Klasse'.
I use any kind of thread that has the color and effect that I want. Sometimes the thread is the same in the needle and bobbin and sometimes, the thread in the bobbin is wildly different from the thread in the needle.
Set your bobbin tension for the thread in your bobbin, find the needle size that works with the thread you want in the needle and balance the needle tension with the bobbin tension. It will all be second nature to you before you know it. :)
I usually use 50wt or 60wt thread (or a polyester equivalent) for piecing and the needles that work best with those sizes is probably going to be a 10, 11 or 12.
I use a variety of threads for quilting - if I'm using Bottom Line in the needle, I use a size 9 or 10 needle for quilting. If I'm using a 40wt thread (or the poly equivalent) I use a 12 or 14 needle. If I'm using a 30wt thread or larger, I use a 14 or 16 needle - or even larger, just depending upon what it takes to form nice stitches with the combination of fabrics and batt and thread.
I buy ordinary 15x1 sharp needles by the hundred on eBay for $12-15 per hundred - Organ and Orange brands are both very low-priced but high quality.
If I need specialty needles like twins or wings or topstitching, I need to go to one of the more expensive brands, like Schmetz or Klasse'.
I use any kind of thread that has the color and effect that I want. Sometimes the thread is the same in the needle and bobbin and sometimes, the thread in the bobbin is wildly different from the thread in the needle.
Set your bobbin tension for the thread in your bobbin, find the needle size that works with the thread you want in the needle and balance the needle tension with the bobbin tension. It will all be second nature to you before you know it. :)
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
7
09-24-2011 10:03 AM