Nested blocks, now what?
#1
Member
Thread Starter
Join Date: May 2020
Location: Illinois, USA
Posts: 7
Nested blocks, now what?
Hi, I am making a easy 5” block quilt and it is my first. I nested my seams and sewed the first row to the second row and the second to the third. At this point I have two questions. Do I continue to sew all the rows together and then iron or do I iron in between? I am sewing the rows in opposite directions so it does not sag in the middle. I am also unsure how to iron the row seams all in the same direction or do I fan the 4 point centers? Not following a pattern and found lots of videos on nesting but they all stop at that point. Thanks Beth
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,539
I nest my seams whenever possible. I like to iron each 2 row joins. Once all my 2 rows are ironed, then I join and iron into 4 rows. Since I don’t have a big ironing surface, this works best for me. If you have a big board ironing surface, you can wait until you get a large section joined.
#3
Member
Thread Starter
Join Date: May 2020
Location: Illinois, USA
Posts: 7
I nest my seams whenever possible. I like to iron each 2 row joins. Once all my 2 rows are ironed, then I join and iron into 4 rows. Since I don’t have a big ironing surface, this works best for me. If you have a big board ironing surface, you can wait until you get a large section joined.
#4
Super Member
Join Date: Nov 2008
Location: Duluth/ Superior, WI
Posts: 1,038
Beth, I alternate the row seams. First row to the left, second to the right, third to the left, forth to the right and so forth. It helps your top to lay flatter and easier for seams to nest. And like Tartan I assemble two at a time as it helps keep assembly a bit under control.
#6
Member
Thread Starter
Join Date: May 2020
Location: Illinois, USA
Posts: 7
Thanks everyone! The funniest things tend to be uber important when you start something new—like swishing with the iron — but once you know the reason why it makes sense. Just hard to know when it is important and when not.
#7
I do mine like Tartan. I tried sewing several long rows together and then pressing. Didn't work out as good and harder to control the seams.
No one way to do anything, some are easier, neater and better results then others.
Always have to see which way works for you.
No one way to do anything, some are easier, neater and better results then others.
Always have to see which way works for you.
#8
Super Member
Join Date: Jul 2010
Location: Flagstaff, Arizona
Posts: 9,475
When I am making a large quilt I put about 2 or 3 rows together and then iron them. Then I work on the next section of 2 or 3 rows. This way it is easier for me to iron smaller areas versus trying to get the whole quilt done and then iron.
#9
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
I nest my seams whenever possible. I like to iron each 2 row joins. Once all my 2 rows are ironed, then I join and iron into 4 rows. Since I don’t have a big ironing surface, this works best for me. If you have a big board ironing surface, you can wait until you get a large section joined.
But I press all seams on each strip at the same time. All strips need to be numbered at the top. All even numbered rows seams going toward you as you will be sewing; and all odd numbered rows go away from you.
Start with folding row one to the right over row two. Put this under the needle with all the fabric to the right of the needle. Sew each two together like that, on the right side of the needle. Place row three over row four, etc.
Now lay them out again and place rows three and four to the left, unto rows one and two. Sew these together on the left side of the needle. You will find that, again, the top seam faces away from you and the bottom seam is toward you. It's so much easier to keep the top seam facing the correct way when you can see it.
#10
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,168
Hey Bethcote, your question is really common and is one I struggle with in terms of pressing to the side, there seems to be so many rules and variations and if/thens involved.
I solve it by pressing seams open. I'm like a hobbit and I like "one rule to rule them all". There are some very rare times when I do press to one side, for example in curves, always easier/better/smoother results for me when I press to the side. Some construction techniques (like one I'm using right now foundation piecing) require/result pressing to the side.
In pressing open particularly, but in all quilting you need to have a small enough stitch length in your seams. If your seams fall apart, or press apart or quilt apart that is due to stitch length, not to being open or shut.
I solve it by pressing seams open. I'm like a hobbit and I like "one rule to rule them all". There are some very rare times when I do press to one side, for example in curves, always easier/better/smoother results for me when I press to the side. Some construction techniques (like one I'm using right now foundation piecing) require/result pressing to the side.
In pressing open particularly, but in all quilting you need to have a small enough stitch length in your seams. If your seams fall apart, or press apart or quilt apart that is due to stitch length, not to being open or shut.