Prewashing large cuts of fabric?
#22
Super Member
Join Date: Dec 2011
Location: Horse Country, FL
Posts: 7,341
I have a front loader (grrrr...don't go there) which does have the nice feature of "rinse and spin." I don't get much ravel effect when I do large pieces. I figure the rinse and spin is enough to get the dust and extra dye out (using a Color Catcher for that) and then any shrinkage is taken care of with the dryer. Plus the whole thing will be completely washed when it's finished. Works for me!
#23
You'll get dozens of dirfferent 'tricks and tips', most of which take quite a bit of extra time, put 'agitated' pin holes in your brand new fabric, waste thread and machine time, and/or don't work.
I pre-wash everything, mostly yardage from 3 to 6 yards but sometimes up to 10, and don't do anything special to it at all before it goes in the washer. I wash the unfolded fabric on the gentle cycle with plenty of water and only with other fabric, never with regular laundry. After washing, I trim any long 'thread trash' with the scissors that live on my dryer, shake any kinks out and toss it into the dryer. It comes out completely knot free, pretty much wrinkle free, and never ravels more than a scant quarter inch.
I've been washing tons of yardage this way for over 15 years and have NEVER had any of it wind up in knots in either the washer OR the dryer. People never believe it works, but that's their loss, not mine.
I pre-wash everything, mostly yardage from 3 to 6 yards but sometimes up to 10, and don't do anything special to it at all before it goes in the washer. I wash the unfolded fabric on the gentle cycle with plenty of water and only with other fabric, never with regular laundry. After washing, I trim any long 'thread trash' with the scissors that live on my dryer, shake any kinks out and toss it into the dryer. It comes out completely knot free, pretty much wrinkle free, and never ravels more than a scant quarter inch.
I've been washing tons of yardage this way for over 15 years and have NEVER had any of it wind up in knots in either the washer OR the dryer. People never believe it works, but that's their loss, not mine.
#28
Super Member
Join Date: Jul 2010
Posts: 6,430
I zig zag the cut edges to prevent raveling, but I also cut the corners off--just a small snippet. Then, if your fabric ravels, it will run just across the fabric once because you cut the corners. I would not cut the fabric any smaller; you will need the very piece you cut too small. Murphy's Law works well in fabric.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
1
05-16-2011 01:06 PM