Printing on fabric to quilt
#51
Member
Join Date: Mar 2009
Location: N California
Posts: 35
This blog has some interesting info..and the links she sends you to..purchased the soda ash and epson salts..this is on my to to list. http://www.craftpassion.com/2010/07/...-printing.html
#52
I made a picture quilt for my grandson several years ago. he's crazy about cars, so I took pictures of him in various family cars, his little toy jeep, etc. It took me a over a year to finish (after I had collected all the fabric) because I was working full time and I didn't make all the pictures the same size, so I basically had to design the quilt as I sewed. Hand quilting it was very hard .... I had to pull the needle through with pliers when I quilted around the pictures. I used the pre-packaged printer fabric (Colorfast Sew-in Inkjet Fabric Sheets by June Tailor) and our HP 6210 and they turned out beautifully. However, I don't think I'll ever make another picture quilt for a kid's bed. My daughter wants a memory quilt, but I think it will be a wall hanging instead. :-) It goes back to the old question of how much do people appreciate the quilts if they haven't made one themselves. I guess there is no way non-quilters can imagine how much work goes into one. After all this, I guess I'd better attach a picture or two ....
Gabe's qult - Christmas 2007
[ATTACH=CONFIG]104374[/ATTACH]
#55
Senior Member
Join Date: Feb 2010
Location: Reno, Nevada
Posts: 794
Originally Posted by Corry
Originally Posted by Jo Belmont
It was just last week I discovered a sure-fire method for producing and printing PERMANENT, WASHABLE-WITHOUT-FADING LABELS of any size (up to letter/legal) on ANY quilting fabric (as long as it has been washed first to get rid of the sizing, etc.). Of course you have many font choices through whatever program/word processor you use, but don't forget that you can use colors, add pictures, graphics, etc. . . . whatever you can print, you can put on the label.
Prior to this, I had prematurely put to rest a couple printers and said aloud a whole bunch of words I didn't even know I knew.
HERE'S HOW I DISCOVERED TO DO IT:
You need 1) a piece of cardstock, 2) a can of quilt basting spray, and 3) a piece of washed, ironed (NOT starched) fabric for your label at least as large as the cardstock.
Lay the cardstock on a sheet of newsprint or freezer paper, etc. to catch any overspray. Give it a good spray overall with the basting spray, being very sure to get all the edges, especially the top and bottom edges. Lay fabric on top of the cardstock and smooth out so it's all very flat. Unless you have really "dampened" your cardstock, you shouldn't need to put the cardstock/fabric under a book or anything; just give it a few minutes to be sure it is absolutely dry.
With your rotary cutter, trim the fabric exactly to the edges of the cardstock. Place in your printer in the proper way so the fabric meets the ink cartridges (on mine, as with most printers, the fabric goes in the tray face down and comes out face up with the image thereon).
HERE ARE SOME PRINTING TIPS:
Start your label at least a couple inches down the page. That way, if your printer happens to "hesitate" just a tad when it's grabbing the cardstock/fabric, it will have settled after the first inch or two and your image won't be distorted.
Set your printer up for "BEST" quality. That ensures that you're going to get maximum ink and saturation on the fabric without a "bleed."
Let the newly printed image set for at least 10 minutes, then iron with a piece of unstarched fabric over the image. MAKE SURE TO USE YOUR IRON ON DRY AND TRY IT OUT BEFORE PUTTING IT OVER THE LABEL TO MAKE SURE ALL THE WATER/STEAM IS GONE. Set it on high heat and iron over it several times with the piece of fabric over it. This "sets" the ink. Let cool thoroughly before cutting and sewing it.
THE PRINTER I USE:
I have used inkjets (HPs mostly), but I've had the absolute most resounding success with my KODAK ESP7 printer which uses pigment inks, unlike the inket cartridges. The inkjets will work, but I think the pigment inks are somewhat more lasting.
(Well, I certainly didn't think I'd go on so long, but perhaps this will help.) Thanks for your time. ~Jo
Prior to this, I had prematurely put to rest a couple printers and said aloud a whole bunch of words I didn't even know I knew.
HERE'S HOW I DISCOVERED TO DO IT:
You need 1) a piece of cardstock, 2) a can of quilt basting spray, and 3) a piece of washed, ironed (NOT starched) fabric for your label at least as large as the cardstock.
Lay the cardstock on a sheet of newsprint or freezer paper, etc. to catch any overspray. Give it a good spray overall with the basting spray, being very sure to get all the edges, especially the top and bottom edges. Lay fabric on top of the cardstock and smooth out so it's all very flat. Unless you have really "dampened" your cardstock, you shouldn't need to put the cardstock/fabric under a book or anything; just give it a few minutes to be sure it is absolutely dry.
With your rotary cutter, trim the fabric exactly to the edges of the cardstock. Place in your printer in the proper way so the fabric meets the ink cartridges (on mine, as with most printers, the fabric goes in the tray face down and comes out face up with the image thereon).
HERE ARE SOME PRINTING TIPS:
Start your label at least a couple inches down the page. That way, if your printer happens to "hesitate" just a tad when it's grabbing the cardstock/fabric, it will have settled after the first inch or two and your image won't be distorted.
Set your printer up for "BEST" quality. That ensures that you're going to get maximum ink and saturation on the fabric without a "bleed."
Let the newly printed image set for at least 10 minutes, then iron with a piece of unstarched fabric over the image. MAKE SURE TO USE YOUR IRON ON DRY AND TRY IT OUT BEFORE PUTTING IT OVER THE LABEL TO MAKE SURE ALL THE WATER/STEAM IS GONE. Set it on high heat and iron over it several times with the piece of fabric over it. This "sets" the ink. Let cool thoroughly before cutting and sewing it.
THE PRINTER I USE:
I have used inkjets (HPs mostly), but I've had the absolute most resounding success with my KODAK ESP7 printer which uses pigment inks, unlike the inket cartridges. The inkjets will work, but I think the pigment inks are somewhat more lasting.
(Well, I certainly didn't think I'd go on so long, but perhaps this will help.) Thanks for your time. ~Jo
#56
I've done it both ways. I prefer to make my own. I just like saving the extra money. I have an epson, but I do not recommend it!!!!!!! It is very finicky. My HP loved to print on paper, and it never had a problem. But have learned hat if paper is having a problem going through, I spray baste a piece of printer paper to the back of the freezer paper, then it goes through nicely. I prepare my own fabric because I buy the best white I can get which provides a better picture, and if you are trying for an antique looking quilt you can use a off white, it works great.
#57
Junior Member
Join Date: Nov 2009
Location: Fargo, North Dakota
Posts: 286
Originally Posted by dotcomdtcm
I have to buy a new printer. Printing on cloth finished off the old one. Any recs? Thanks so much!
#60
Super Member
Join Date: May 2007
Location: Illinois
Posts: 3,474
Originally Posted by Ditter43
I bought the bubble jet set but haven't used it yet. I plan to do my own fabric with freezer paper too. :D
Thread
Thread Starter
Forum
Replies
Last Post