Pulled Seams
#1
I don't know if anyone has had this problem,but here is what happened. After I brought my quilt home from being long arm quilted, I noticed two pulled seams. I don't know how it happened unless the long arm machine stretces the fabric and pulls it. But here is what I did---I took some stitch witchery and put it in the seams and fused it together. Now it all blends in together again. After I finished t he quilt top I checked it over very carefully and repaired things where needed, before I took it to the shop. So I am bafled by the pulled seams.
#2
I don't really understand what you mean by pulled, but yes when you put it on a frame for quilting it does pull it taut, it should not stretch anything out of shape or pull apart a seam unless it wasn't secured well and then I think it would only happen on the ends.
#3
No, pulled seams can happen at any interior corner. If the fabrics had different degrees of give and/or are turned in the blocks there is uneven give across the surface. An observant LA quilter will notice and adjust but it is troublesome to work at one tension and then find a spot that needs TLC. I think this is one of the arguments LAQ's have for not mixing your fibres in a quilt.
#8
I have taken to making a two-stitch backstitch in my lock stitches on the end of seams, because I've found that just taking one backstitch sometimes is not enough if the piece is later stretched.
Seems to help.
'
Seems to help.
'
Originally Posted by The Bag Lady
Kathy the seams pulled apart. I don't know how much plainer I can explain. It separated and I did backtitch all my seams.
#10
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
when your quilt is 'loaded' to be long-arm quilted it is stretched tight and smooth across the quilting area. this puts lots of tension on the seams in a pieced quilt. i have noticed often interior seams pull apart. i usually try to 'fix' them as i quilt but at times it is too much for the quilting to take care of it. in those places i put some sort of (mark) to identify the spot so repair can be done after the quilting. it can be from thread breaking as easily as from not being secure in the first place. i try to kind of pull on areas of my piecing to make sure seams are not coming apart while i am constructing so i can identify problem areas before loading it on the frame. your fix sounds like a good one.
Thread
Thread Starter
Forum
Replies
Last Post
dreamer2009
General Chit-Chat (non-quilting talk)
50
04-06-2011 08:55 AM
Ditter43
General Chit-Chat (non-quilting talk)
19
08-30-2010 10:09 AM