Question about PP-ing
#1
I am trying pp-ing for the first time.
The pattern I downloaded has dark lines and light lines.
I know I'm to sew on the light lines.
But what are the dark lines for?
Am I supposed to cut the pattern apart?
I've googled and watched youtube videos etc but no one says what the dark lines are for.
Here's the pattern:
http://www.paperpanache.com/free/simplereqs/paw.htm
Thanks
The pattern I downloaded has dark lines and light lines.
I know I'm to sew on the light lines.
But what are the dark lines for?
Am I supposed to cut the pattern apart?
I've googled and watched youtube videos etc but no one says what the dark lines are for.
Here's the pattern:
http://www.paperpanache.com/free/simplereqs/paw.htm
Thanks
#2
Yes, you are correct about cutting it apart. Notice that the numbering in each of the sections starts at 1 again, so each section needs to be done on its own and then sewn together for the full block. Please post a picture of the block when you get it sewn together.
#6
the dark lines are the sections you cut them and when you sew each section thats where you put it back together each section is marked 1 threw 7 or 8 add the 1/4 inch to the dark lines and outside edges
hope this helps
hope this helps
#7
Banned
Join Date: Nov 2010
Posts: 4,134
You don't have to add the SA to the paper.
Just make sure you have enough fabric overhanging the edges of each section. Always sew, though, to the end of the fabric or at least the 1/4", even if it's off the paper.
And when you're all done sewing the pieces to that particular section, you can trim it leaving a nice, clean 1/4" all around - measuring from the edge of the paper.
The benefit is that there will be no paper caught in your seam allowances that you have to pick out later.
Just make sure you have enough fabric overhanging the edges of each section. Always sew, though, to the end of the fabric or at least the 1/4", even if it's off the paper.
And when you're all done sewing the pieces to that particular section, you can trim it leaving a nice, clean 1/4" all around - measuring from the edge of the paper.
The benefit is that there will be no paper caught in your seam allowances that you have to pick out later.
#8
Originally Posted by MTS
You don't have to add the SA to the paper.
Just make sure you have enough fabric overhanging the edges of each section. Always sew, though, to the end of the fabric or at least the 1/4", even if it's off the paper.
And when you're all done sewing the pieces to that particular section, you can trim it leaving a nice, clean 1/4" all around - measuring from the edge of the paper.
The benefit is that there will be no paper caught in your seam allowances that you have to pick out later.
Just make sure you have enough fabric overhanging the edges of each section. Always sew, though, to the end of the fabric or at least the 1/4", even if it's off the paper.
And when you're all done sewing the pieces to that particular section, you can trim it leaving a nice, clean 1/4" all around - measuring from the edge of the paper.
The benefit is that there will be no paper caught in your seam allowances that you have to pick out later.
#9
Member
Join Date: May 2010
Location: Southwestern Pennsylvania
Posts: 23
Remember to use a small stitch when sewing: it makes removing the paper easier.
When preparing your fabrics for sewing, I measure each piece at it's widest point and add 1/2" and cut strips.....avoids wasting fabric
When preparing your fabrics for sewing, I measure each piece at it's widest point and add 1/2" and cut strips.....avoids wasting fabric
Thread
Thread Starter
Forum
Replies
Last Post