question on seam rippers
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: MInnesota
Posts: 131
question on seam rippers
I have a terrible time with seam rippers. They get dull so fast. I have tried different ones but have the same problem. What is the best one that stays sharp for a longer period of time.
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,539
I prefer a pointed, sharp pair of thread snips. I clip every 3 to 4 stitch on the back and then pull the top thread from the top. I do not get any distortion of the pieces like you an get with a stitch ripper.
#3
i never use my seam rippers as rippers.
i use them as stitch pickers.
sometimes i use it in the same way as tartan does.
sometimes i just pull 3 stitches at a time one one side.
if the stitch tension was right, that's about as easy and i don't have to pick any tiny threads away with tweezers.
This is the way I use mine also
i use them as stitch pickers.
sometimes i use it in the same way as tartan does.
sometimes i just pull 3 stitches at a time one one side.
if the stitch tension was right, that's about as easy and i don't have to pick any tiny threads away with tweezers.
This is the way I use mine also
__________________
- necessity is the mother of invention. lazy is the crazy aunt.
- for issues regarding the reminder emails, please contact [email protected]
Last edited by QuiltnNan; 02-17-2020 at 05:06 AM.
#4
The one I am using right now is called seam-fix and is good, it has the rubbery end to help wipe away the cut threads. I was gifted the same brand but larger and it is so big (and has two ends) that it is useless as a seam ripper. I just looked at my assortment and most don't even have a name on them. Good luck!
#6
I love the ones that came with my machines. Other ones I have purchased such a Driz become dull so quickly. Ones made by Brothers can be purchased individually and I have some that are many years old and you would think were brand new.
#7
I hate those pointed seam rippers. i tend to use my small scissors or my small rotary blade like Eleanor Burns of Quilt In A Day does.
Last edited by nativetexan; 02-16-2020 at 02:48 PM. Reason: spelled one word incorrectly
#8
Senior Member
Join Date: Apr 2012
Location: The Woodlands, Texas
Posts: 621
When I first started quilting, Clover #463 was suggested. I have since also purchased a Clover #482. Both are great and I have not noticed them getting dull. I have always been impressed with Clover -- they have great quality sewing equipment.
#9
Super Member
Join Date: Mar 2010
Location: Ridgefield WA
Posts: 7,765
A wonderful trip I've discovered...
Sqeeze the seam gently with ends on thumb going to finger tip. The squeezing makes the stitch "loosen" just a little as it now "bridges" the gap in the fabric caused by squeezing. Makes a tiny space between the thread and the fabric like a little bridge. Point of ripper slides much easier under thread and allows thred to be cut with ripper or fine scissors.
Last edited by Kitsie; 02-16-2020 at 03:56 PM. Reason: Trying to write TIP instead of Trip!
#10
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I like a nice, inexpensive Dritz (blue handle usually) cause the handle is large enough and is flat so it doesn't roll off my sewing table. I do both pick out and rip (the red ball goes down/not seen and the point up--you can rip a nice straight longer seam quickly) and have at least 4-5 of these rippers. At the price, I try to pitch my dullest one when I buy a new one--about once a year.