Small Ironing Surface and Larger Fusible Web Project
#1
Power Poster
Thread Starter
Join Date: Jul 2008
Location: East Oklahoma - pining for Massachusetts
Posts: 10,477
Small Ironing Surface and Larger Fusible Web Project
I would like to finish a wall hanging kit by McKenna Ryan. It is not huge, however I have a very small ironing board that just sits on the table. If I spread some batting (Warm and Natural) across my table will it act like an ironing surface? I am so worried that the tiny pieces will shift while I am trying to secure them to the background that I am afraid to proceed to the next step. The instructions sound as though all the pieces are to be fused at the same time.
Usually I do fusing in layers. Could I do this now? If you have made McKenna's projects would you do this? I have had this kit for several years now and would like to get it done.
Usually I do fusing in layers. Could I do this now? If you have made McKenna's projects would you do this? I have had this kit for several years now and would like to get it done.
#2
Super Member
Join Date: Sep 2010
Location: Myrtle Beach, SC
Posts: 8,145
What kind of table do you have? That might make a difference.
You might need multiple layers of 100% batting with a piece of fabric like duck fabric covering it to make it safe to use on your table. If you have a few old towels you can use instead of batting, that would probably work, too. Use painters tape to secure them in place at the edges of the table, with most of the tape placed under the table. Duck tape would work well for temporarily securing the ironing pad to the table, but the glue may be difficult to get off of the table.
Alternatively, go out and buy a piece of plywood and have it cut the size you want it. Cover it with several layers of batting and a nice heavy weight, iron-able fabric and secure the batting and fabric in place. Make sure the back of it will not scratch the table - maybe put a piece of fabric over it, too. Put it on the table, use it and then put it in storage for the next time you need it. Of course, that assumes you have a place to store it.
You might need multiple layers of 100% batting with a piece of fabric like duck fabric covering it to make it safe to use on your table. If you have a few old towels you can use instead of batting, that would probably work, too. Use painters tape to secure them in place at the edges of the table, with most of the tape placed under the table. Duck tape would work well for temporarily securing the ironing pad to the table, but the glue may be difficult to get off of the table.
Alternatively, go out and buy a piece of plywood and have it cut the size you want it. Cover it with several layers of batting and a nice heavy weight, iron-able fabric and secure the batting and fabric in place. Make sure the back of it will not scratch the table - maybe put a piece of fabric over it, too. Put it on the table, use it and then put it in storage for the next time you need it. Of course, that assumes you have a place to store it.
#3
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
You might end up damaging your table if it's wood. If you need a large area, I might see if I could a couple of large sheets of cardboard. You could lay them down first and put the batt on top for extra protection. You also need to think about if you are dry ironing or steam. If using steam, it may go through the batt and cardboard and ruin wood.
#5
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,585
I would use a towel, or maybe a flat sheet folded in quarters. If you have a surface you'd like to protect from heat and steam, definitely use more layers.
Make sure to use parchment paper, also, to prevent fusible from getting on your surfaces.
Make sure to use parchment paper, also, to prevent fusible from getting on your surfaces.
#7
how about getting a piece of masonite or wood that would fit on your dining table? Have it cut, add some knobs or feet to the bottom to keep it from scuffing up your table. staple a layer of batting and a top layer. I have used ironing board fabric (the silver stuff), cute novelty fabric but my fav is white or off white cotton duck. You can store it behind a door or under a bed. A handle that is not as deep as the feet would make it easier to pick up.
#8
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,782
I have an old wool blanket that I bought at a garage sale the I put over my tables doubled and iron on it when I need a larger ironing surface and it works fine. You may need more than one layer to protect your table.
#9
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
ANd if you're not using steam you should be ok. I you have a flat cookie sheet, you can place your iron on it by placinghe cookie or baking pan upside down so the iron can rest on it.
#10
Junior Member
Join Date: Jun 2017
Location: Sunny Florida!
Posts: 101
I use a silicone pastry mat with a layer of felt over it directly on my wood table and have not had any harm to my dining table.
of course, this mat was purchased for this reason and pastry has never touched it.
of course, this mat was purchased for this reason and pastry has never touched it.
Last edited by marjben; 07-11-2017 at 10:46 AM.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
14
11-28-2010 09:07 AM
Twilliebee
Links and Resources
3
08-28-2010 01:58 PM