Tension while trying to machine quilt on the grace frame with the sure stitch
#1
Member
Thread Starter
Join Date: May 2008
Posts: 2
I have just bought this new system, I have never machine quilted and now I am beginning to wonder what the heck I have done. I have everything together, checked the tension all is good using coats and guterman thread and I can finally sew some what but still have the thread breadking and the stitch is quite long. #5 on the sure stitch. Anyone help with some words of wisdom?
#2
Lesleigh,
This forum won't let me link you but there is a Yahoo group called grace frame co over there.
Kathy and her husband Lynn run the site and they are the owners of the website Kathy Quilts. Ask your question over there and you are sure to get an answer. They are Grace Co. sales reps.
Hope this helps
This forum won't let me link you but there is a Yahoo group called grace frame co over there.
Kathy and her husband Lynn run the site and they are the owners of the website Kathy Quilts. Ask your question over there and you are sure to get an answer. They are Grace Co. sales reps.
Hope this helps
#3
There is a real learning curve with learning to quilt on a frame. Even if you've been sewing or quilting for years, you won't just slide into it.
It sounds like you're having the usual problems of starting to frame quilt.
It's like a dance. You and your partner learn how to work together.
Expect to break needles, break lots of thread, change threads, change speeds, change the needle again, change the bobbin etc etc many many times until you find that 'sweet spot.' Then the magic will come.
I found out the first thread I was using was too soft. It was beautiful, but too thick and soft for a higher speed machine on a frame. When I changed the thread to a thinner one, and one with a bit of poly in it, it got better. Then the needle. It has to fit your thread. If the eye is too small, there will be too much friction and the thread will shred. Try a topstitch needle, it has a larger eye and is sharp!
Check your bobbin, make sure it is wound evenly, and yes, inserted properly. It usually helps to have the same thread top and bottom.
Now. The speed. Most experience sewers are used to hitting the speed "pedal to the metal." For longarming, especially if just learning, try using a medium to med/fast speed instead of full speed. you might have better success.
And last of all. Practise, practise, practise. It can take 40 quilts or so to become proficient at longarming. Get some old bedsheets and blankets from a thrift store and make up some sandwiches. Practise loading them on the frame. Practise adjusting the frame for the machine. The rollers should be a finger's width above the machine bed. As you roll up more quilt, you'll have to adjust them higher - then remember to lower them again for the next quilt.
So, as you can see, even if the test drive in the shop was easy, there are a lot of factors that have to get in balance for you to make your machine dance with you.
Don't give up. Hang in there. You will make beautiful music - in time.
It sounds like you're having the usual problems of starting to frame quilt.
It's like a dance. You and your partner learn how to work together.
Expect to break needles, break lots of thread, change threads, change speeds, change the needle again, change the bobbin etc etc many many times until you find that 'sweet spot.' Then the magic will come.
I found out the first thread I was using was too soft. It was beautiful, but too thick and soft for a higher speed machine on a frame. When I changed the thread to a thinner one, and one with a bit of poly in it, it got better. Then the needle. It has to fit your thread. If the eye is too small, there will be too much friction and the thread will shred. Try a topstitch needle, it has a larger eye and is sharp!
Check your bobbin, make sure it is wound evenly, and yes, inserted properly. It usually helps to have the same thread top and bottom.
Now. The speed. Most experience sewers are used to hitting the speed "pedal to the metal." For longarming, especially if just learning, try using a medium to med/fast speed instead of full speed. you might have better success.
And last of all. Practise, practise, practise. It can take 40 quilts or so to become proficient at longarming. Get some old bedsheets and blankets from a thrift store and make up some sandwiches. Practise loading them on the frame. Practise adjusting the frame for the machine. The rollers should be a finger's width above the machine bed. As you roll up more quilt, you'll have to adjust them higher - then remember to lower them again for the next quilt.
So, as you can see, even if the test drive in the shop was easy, there are a lot of factors that have to get in balance for you to make your machine dance with you.
Don't give up. Hang in there. You will make beautiful music - in time.
Thread
Thread Starter
Forum
Replies
Last Post
Wendys Quilts
Main
13
12-18-2018 02:51 PM