Thread help please
#1
Member
Thread Starter
Join Date: Dec 2010
Location: New Orleans area
Posts: 94
Someone gave me several spools of thread...........the thred that comes on a cone like u use on a Serger. I cant fit it on my thread spool on the sewing machine....its way too big. Does anyone have any ideas on how i can transfer the thread to a regular size spool? TIA
#3
Member
Thread Starter
Join Date: Dec 2010
Location: New Orleans area
Posts: 94
Originally Posted by Izaquilter
get you a spool holder that sits off to the side of your sewing machine. It doesn't really have to be on your sewing machine, just make sure it goes thru all the tensions.
#4
this is the one I have. It's pretty lightweight but it's cheap.
http://www.thecalicocottagequiltshop...ead-holder.jpg
http://www.thecalicocottagequiltshop...ead-holder.jpg
#5
Power Poster
Join Date: Mar 2009
Posts: 15,639
I read a horror story on a gal's blog a while ago where she used serger thread for her piecing. Didn't realize that it was Nylon thread and melted it when she pressed the top. All of her piecing had to be redone. Make sure to test yours under the hot iron first.
#6
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
JoAnn's has thread holders, usually on the notions wall. I have cones of thread that look like serger cones but are cotton. Is there a label inside the cone so you can figure out what the thread is made out of?
#8
Super Member
Join Date: Oct 2008
Location: chicago, IL
Posts: 9,589
depending on your machine...you could even take a quart jar and stand it behind your machine...drop the thread into it and thread up the machine. I works just fine for me with one of my machines that can't handle the larger spools...
Thread
Thread Starter
Forum
Replies
Last Post