Threading different machines
#21
Super Member
Join Date: Jul 2010
Posts: 1,789
When we do clinics with 4H kids we ask them to bring the manuals. Problem is, some borrow an older machine and the manual is no longer around. Having a way to look up instructions is a good backup. I know I have a couple older machines that have missing manuals due to moves etc. Fine for me cause I know the machines but difficult for anyone else
#22
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,563
It's not an old machine at all. It's a Janome 1600P DB, and is very similar to the Brother Nouvelle 1500, which I also own. They are both straight-stitch, 9-inch harp, high speed machines. I buy Organ needles for both machines. Because they're so similar, I use the Janome as a backup, so it's been a while since I had to purchase needles. I'd probably buy them online.
#23
Super Member
Join Date: Sep 2010
Location: California, USA
Posts: 1,318
I didn't read all of the comments, so forgive me if I am repeating what others have said...
IF there is a sewing needle in the machine already, you can feel where the slit is in the sewing machine needle. Just use your finger to feel. If you are not sure what I am talking about, take a sewing machine needle from your pack of needles and look closely at it. You will see a groove that goes down the length of the needle: this is the side that you will thread your needle from.
Another way is to take a mirror and look up where the needle is inserted. This will show you which side the flat part of the needle needs to be inserted. Since the flat side of the needle is the opposite side of where you put your thread in (the side with the slit), you will know which side you thread the needle from.
Hope this makes sense.
IF there is a sewing needle in the machine already, you can feel where the slit is in the sewing machine needle. Just use your finger to feel. If you are not sure what I am talking about, take a sewing machine needle from your pack of needles and look closely at it. You will see a groove that goes down the length of the needle: this is the side that you will thread your needle from.
Another way is to take a mirror and look up where the needle is inserted. This will show you which side the flat part of the needle needs to be inserted. Since the flat side of the needle is the opposite side of where you put your thread in (the side with the slit), you will know which side you thread the needle from.
Hope this makes sense.
#25
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
Have the students send you an email with photo attached or text with photo attached and the make and model of the machine. So you can find any manuals and also keep a couple magnifying glasses on hand. Often young eyes can't see the eye of the needle.
#26
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
If the last thread guide is on the right, put the thread in from the right. If the last thread guide is on the left, put the thread in from the left.
I have two machines that have very different threading from the spool to the needle. One is a Delta Rotary and the other is the Eldridge Two Spool. The thread comes from the spool, over the edge of the face plate, makes a complete right turn around the tension mechanism, down to a thread guide, up to the thread take up lever, crosses over it self again to the next thread guide and then down to the needle. I would never have figured that out without the manual.
I have two machines that have very different threading from the spool to the needle. One is a Delta Rotary and the other is the Eldridge Two Spool. The thread comes from the spool, over the edge of the face plate, makes a complete right turn around the tension mechanism, down to a thread guide, up to the thread take up lever, crosses over it self again to the next thread guide and then down to the needle. I would never have figured that out without the manual.
#27
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,334
It's not an old machine at all. It's a Janome 1600P DB, and is very similar to the Brother Nouvelle 1500, which I also own. They are both straight-stitch, 9-inch harp, high speed machines. I buy Organ needles for both machines. Because they're so similar, I use the Janome as a backup, so it's been a while since I had to purchase needles. I'd probably buy them online.
doesnt use round needles. I have the manual.
#28
Super Member
Join Date: May 2011
Location: Pacific NW
Posts: 9,563
#29
I used my old Singer for over a year w/the needle in the wrong way. No it didn't sew perfect but I was surprised (once I realized it was wrong) by how much sewing I had gotten done w/the needle in wrong. It was like having a new machine once I put the needle in correctly, LOL.
Thread
Thread Starter
Forum
Replies
Last Post
Caroline94535
For Vintage & Antique Machine Enthusiasts
14
12-04-2015 04:12 PM
SingerSewer
Main
10
06-22-2013 06:24 AM