Topstitch needle ?
#1
Topstitch needle ?
I keep hearing that if you use a top stitch needle for free motion quilting you won't get a lot of eyelashes on the back. What size top stitch needle is best for FM quilting?
#3
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 16,426
I have taken too many free motion quilting classes to know that thread type and size, tension, pressure, needle size and type, and bobbin thread type, all have to play together. It's not just one single thing. 90/14 is for 40 wt thread as it is a large size needle.
#4
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
#5
I seems to me that the coats and clark site had a print out you could use for the thread and needle size to use together. I have a business card sized one I bought at hancock fabrics years ago I use for a cheat sheet. I often use the denim needle for heavier weight fabric quilts. It helps to stop the shredding.
Here is a chart I found with a google search
http://www.sewing.org/files/guidelin...dle_charts.pdf
Here is a chart I found with a google search
http://www.sewing.org/files/guidelin...dle_charts.pdf
Last edited by RedGarnet222; 07-13-2019 at 04:28 PM.
#6
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
the type of fabrics, batting, number of seams in front/back, sizes of pieces in the blocks, etc.
#7
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,735
#8
I'm still new at fmq and I had trouble a few times with the thread nests underneath. It was the bobbin thread being in wrong each time. I use the same thread in top and bobbin and a titanium topstitch needle. Lots of practice later and it is finally looking better,
#10
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,334
Agree, and also eyelashes come from moving around a curve too fast. I usually use a 90/14 topstitch, sometimes go down. All depends. My machine doesn't have tension issues, luckily.
Thread
Thread Starter
Forum
Replies
Last Post
Onebyone
Links and Resources
10
03-13-2015 09:52 AM