Trouble with borders
#1
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Texas
Posts: 512
Trouble with borders
This isn't my first rodeo, but it is the biggest quilt I've done. I do it the Bonnie Hunter way, that didn't work this time, too short. Tried measuring in 3 places and it's too long. If I hadn't spent so much money and time on this thing I'd have a bonfire with this quilt being the star attraction. Any advice would be appreciated.
#4
#5
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
I make sure my quilt top is well pressed and sometimes starched before measuring. I measure the shortest sides first(usually top and bottom) if they are the same, I cut my 2 end borders but leave an extra inch. I mark where the end should be in the seam allowance (Frixion pen)I pin to the mark and place pins at intervals along the length easing in any extra fabric from the top where needed. If the top extends over the mark a tad after sewing, I don't worry about and then trim off the extra. I follow the same process for the long sides.
#6
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
#8
Senior Member
Thread Starter
Join Date: Jan 2012
Location: Texas
Posts: 512
Tartan, I've printed off your instructions and will give that a go. It's just so frustrating! I told DH that once I got this one finished I'd probably give it away even though I'm making it for us, because every time I look at it, I get mad, lol.
#9
Junior Member
Join Date: Nov 2011
Posts: 125
If the border piece is larger than the top, find the center and quarters of the quilt top and the border. Pin the centers and quarters together. Line up ends and pin. Then put a few pins between the ones already holding the pieces together. Now put the border against the feed dogs and sew. The feed dogs should ease as much as a half inch per half. If the quilt top is larger, put it against the feed dogs. Works everytime for me.
#10
I have very good results with Bonnie Hunter's method and have not "measured" a border since. I fold my pressed quilt top in half the long way, smooth it out, lay the border pieces out on top, smooth those. I pin every so often so they don't shift. Then I cut either end even with the top. I fold the borders into quarters and either press or pin the edge. Do the same with the top. Match the quarter marks, I pin ALOT (every 6" or so) and ease the rest in as you sew. Press, repeat for the other edges.
Some fabrics have more "give" than others. Be careful you aren't stretching as you measure.
Some fabrics have more "give" than others. Be careful you aren't stretching as you measure.
Thread
Thread Starter
Forum
Replies
Last Post