Two questions: about spray starch and about cordless irons
#1
Member
Thread Starter
Join Date: Feb 2019
Posts: 65
Two questions: about spray starch and about cordless irons
Hi,
I have noticed when I use spray starch it turns the bottom of my iron brown. Should I be spraying on one side and ironing on the back? Any insight into what I am doing wrong?
I also realized because of my set up, a cordless iron would be a great advantage.
I was wondering if those who use one have any recommendations as to which ones are great or not so great?
Thanks
I have noticed when I use spray starch it turns the bottom of my iron brown. Should I be spraying on one side and ironing on the back? Any insight into what I am doing wrong?
I also realized because of my set up, a cordless iron would be a great advantage.
I was wondering if those who use one have any recommendations as to which ones are great or not so great?
Thanks
#2
My opinion is that likely you spray too much starch on from too close. It's best to spray lightly, press, then , if you think you need it, repeat.Also consider changing brands ( l find Niagara works well.) Lastly, your iron may be way too hot...sometimes an older iron's thermostat fails to function properly.
#4
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
Starch ... I used to use it and abandoned it.
Starch does just what you have found. Watch your ironing board too.
Then ... someday, you may find a white fabric that looks dirty and guess what? Yup, the starch!
Instead .... I use Best Press. Most any of the LQS' sell it.
It does the job and I don't get the scorching issues.
Iron ... have never tried a cordless. I've heard mixed reviews.
When my iron needed replacing I went for an Oliso.
A bit pricey, but worth every bit, IMHO!
Good Luck!
#5
Super Member
Join Date: Apr 2007
Location: Alturas, CA
Posts: 9,393
This is how I was brought up on how to starch. When your iron gets all gunky, it's because when you’re ironing, instead of ironing the fabric, you were ironing the starch. I starch every piece of fabric(right side) I'm going to work with, at least 2 hours ahead of the time, throw it in a plastic bag, and let it sit, then I'll take it out, either line dry or throw in the dryer for a few minutes, then iron(wrong side), have never had a problem with the iron getting all gunky. I do spray mist with water since I don't use the steam on my iron.
#6
Super Member
Join Date: Aug 2009
Location: Illinois
Posts: 1,821
My opinion is that most of us are an impatient lot and we spray and press to quickly. The starch needs time to soak "into" the fabric rather than "on" it. The gunk on the iron is essentially the starch sticking there instead of the fabric.
#8
I have had the Panasonic cordless iron for about 5 years now. I absolutely love the freedom of No Cord! I have no problems with it. I will never go back to an iron with a cord. Most of my ironing now is done for my quilting and sewing, and I have no complaints. My cordless iron is one of my best investments.
Last edited by QuiltnNan; 05-27-2019 at 03:52 AM. Reason: shouting/all caps
#10
Super Member
Join Date: Nov 2014
Location: Ontario Canada
Posts: 1,869
Your post answered my own question about starch - turns out I'm one of the impatient ones! Thanks for the question. On another note, I too have to Panasonic 360 cordless and I love mine. Won't use any other one.
Thread
Thread Starter
Forum
Replies
Last Post
woohoowendy
Main
12
04-02-2011 02:02 AM