Unthreading Your Sewing Machine TIP
#1
Member
Thread Starter
Join Date: May 2013
Posts: 94
Unthreading Your Sewing Machine TIP
Did you know there is a right way and a wrong way to take the thread out of your sewing machine? My brother - in - law was in the garment industry as a sewing machine repairman for over 40 years and he just told me this. To take your spool of thread off of your machine, cut it off at the spool and then pull the thread out from the needle. You should never pull the thread out in the opposite direction that it is threaded. I never knew this!
#4
Super Member
Join Date: Jan 2011
Posts: 1,812
Exactly. I learned that in HS some 40+ (Whew!) years ago. The tension can get totally messed up pulling it out backwards, not to mention the lint that is carried back into the mechanisms. And, never hand turn the flywheel away from you, always toward you. The timing can get out of whack if the backward turning is a habit. The belts are meant to run in a forward motion. My sister's sewing machine flywheel locked up because of this. (We had the same Home Ec teacher. One of us was paying attention in class. LOL)
#5
So how does the machine manage to sew in reverse??
I've unthreaded a wide variety of sewing machines in the many decades since I first learned to use one. In fact, I've never once cut the thread and pulled it from the bottom. The tension only gets "messed up" if you pull backwards on the discs when they are engaged...in other words, when the foot is down. If the foot is not down at the time, it doesn't matter if you unthread your machine frontwards, backwards or sideways.
I've unthreaded a wide variety of sewing machines in the many decades since I first learned to use one. In fact, I've never once cut the thread and pulled it from the bottom. The tension only gets "messed up" if you pull backwards on the discs when they are engaged...in other words, when the foot is down. If the foot is not down at the time, it doesn't matter if you unthread your machine frontwards, backwards or sideways.
#6
I was told by a quilting instructor that it also has something to do with the "grain" of the thread, the way it's twisted it should only go forward through the machine. Don't know if that is true or not. I do know that I've been doing it the "wrong" way for so many years it's just an ingrained habit. It has never caused me any problems yet...
#7
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
It's the newer computer machines that need the thread pulled forward and never backwards.
The older ones are more forgiving.
However, I am now getting in the habit of "wasting" that little bit of thread no matter what machine ... just for the extra precaution.
The older ones are more forgiving.
However, I am now getting in the habit of "wasting" that little bit of thread no matter what machine ... just for the extra precaution.
#8
Bernina recommends pulling the thread out through the needle and not the other way because you can mess up the thingys that control the thread feeding through the machine. Once you do it a few times, it becomes a habit. As to the small amount of wasted thread - it's a whole lot cheaper than having your machine repaired! And I know someone who saves those threads to use later on one of her beautiful art quilts.
#10
Janome website http://alturl.com/meh83 has this posted:
What is the best way to unthread my sewing machine? -Anonymous
Dear Anonymous,
Always cut the thread at the spool and pull the thread through the needle and out of the machine. If you remove the thread by pulling on the spool, the thread can easily get caught, affecting the tension as you pull. Lint from the thread can also cause the needle to bend at the tip, resulting in snagged fabric or inconsistent stitching.
Truth be told, I just started snipping the thread at the spool and right before the threaded needle. Then with the foot raised, I pull down/forward slowly.
This is similar to the way I change thread on my longarm machine.
Nan - Indiana
What is the best way to unthread my sewing machine? -Anonymous
Dear Anonymous,
Always cut the thread at the spool and pull the thread through the needle and out of the machine. If you remove the thread by pulling on the spool, the thread can easily get caught, affecting the tension as you pull. Lint from the thread can also cause the needle to bend at the tip, resulting in snagged fabric or inconsistent stitching.
Truth be told, I just started snipping the thread at the spool and right before the threaded needle. Then with the foot raised, I pull down/forward slowly.
This is similar to the way I change thread on my longarm machine.
Nan - Indiana
Thread
Thread Starter
Forum
Replies
Last Post
cricket_iscute
For Vintage & Antique Machine Enthusiasts
24
06-16-2014 04:37 PM
Jeanne S
Main
10
01-18-2014 06:49 AM
Rhonda
General Chit-Chat (non-quilting talk)
7
07-02-2010 07:11 AM