storing large thread cones
#1
Senior Member
Thread Starter
Join Date: Oct 2013
Location: ontario,canada
Posts: 474
storing large thread cones
Does anyone have the Ikea Eket drawers for storing cones of thread(like the superior threads)? I would like to buy more thread by the cone but can't decide the best way to store it and these look pretty good.
#2
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,355
https://www.ikea.com/us/en/catalog/products/00333947/
Is this what you mean? I don't have it, but, if it works, there is an IKEA close to me so I could consider it. Right now cones are jumbled up in this
https://www.ikea.com/us/en/catalog/p...SABEgJU8PD_BwE
I love IKEA
Is this what you mean? I don't have it, but, if it works, there is an IKEA close to me so I could consider it. Right now cones are jumbled up in this
https://www.ikea.com/us/en/catalog/p...SABEgJU8PD_BwE
I love IKEA
#3
Senior Member
Thread Starter
Join Date: Oct 2013
Location: ontario,canada
Posts: 474
I guess a link would have been helpful,
https://www.ikea.com/gb/en/products/...-art-00333947/
This is the one I am considering. They will fit under my sewing table and still leave me leg room. I thought a drawer pack with a couple of the boxes from the eket set on top would be pretty handy. Need to make it to Ikea to have a look and it is not nearby so I hoped someone else might have tried them.
I love Ikea too.
https://www.ikea.com/gb/en/products/...-art-00333947/
This is the one I am considering. They will fit under my sewing table and still leave me leg room. I thought a drawer pack with a couple of the boxes from the eket set on top would be pretty handy. Need to make it to Ikea to have a look and it is not nearby so I hoped someone else might have tried them.
I love Ikea too.
#5
Senior Member
Thread Starter
Join Date: Oct 2013
Location: ontario,canada
Posts: 474
Yes will take a cone along to test but I am guessing the height will be fine. I am wondering if the drawers will open enough to reach the ones that will be at the back of the drawer and how many cones will actually fit in a drawer.
#7
According to the link, the drawers are 11" deep. That's way too deep for cones of thread IMO. I currently use several plastic storage drawer sets, similar to these. I got mine before I started accumulating thread cones, so I have other things stored in the shorter drawers. Just measure the cones to find out what height drawers you need. https://www.walmart.com/ip/Sterilite...Tower/15442448
#8
Super Member
Join Date: Jul 2010
Location: Central Willamette Valley, Oregon, USA
Posts: 7,695
I have all of my cone thread in two of those single drawer plastic cabinets from the big box store. They are the perfect height for the cones, and if I get too many, I can put some in between upside down. Light colors in one drawer, and darkin the other. Eventually I will take a day and put the contact paper I bought over the sides and front to make them pretty. The contact paper is a black and white brocade look.
#9
Super Member
Join Date: May 2017
Location: Sunny Florida
Posts: 4,434
How tall are the cones you need to store?
For embroidery thread storage, I had dry erase board cut to fit in the drawers. Then glued golf tees in a grid to fit the cones. It keeps the threads from sliding around when the drawer is opened. The tees come in different heights so this method could also be used for the large cones.
Each tray is stored in a wire basket drawer system and holds 81 cones.
I have also used trays like these in the double height storage boxes for serger thread cones.
https://www.artbin.com/cone-tread-tray-6901ab.aspx
For embroidery thread storage, I had dry erase board cut to fit in the drawers. Then glued golf tees in a grid to fit the cones. It keeps the threads from sliding around when the drawer is opened. The tees come in different heights so this method could also be used for the large cones.
Each tray is stored in a wire basket drawer system and holds 81 cones.
I have also used trays like these in the double height storage boxes for serger thread cones.
https://www.artbin.com/cone-tread-tray-6901ab.aspx
#10
Senior Member
Thread Starter
Join Date: Oct 2013
Location: ontario,canada
Posts: 474
Rhonda K, great idea with the golf tees. I presently have all of my cones in plastic bins and every time I move them they end up tipping, tumbling and unraveling. What a mess! It's the reason that I am hesitating about getting more cones until I have a good storage solution.
The superior cones are 4 inches(just over 10cm) and I really would like to store them upright so that they aren't rolling around every time I move their container.
Madame Kelly your brocade contact paper sounds very posh, I think I would like to sew in your sewing room.
I am aiming to make it to ikea today with my cone in my purse so I will keep you posted.
The superior cones are 4 inches(just over 10cm) and I really would like to store them upright so that they aren't rolling around every time I move their container.
Madame Kelly your brocade contact paper sounds very posh, I think I would like to sew in your sewing room.
I am aiming to make it to ikea today with my cone in my purse so I will keep you posted.
Thread
Thread Starter
Forum
Replies
Last Post