Putting borders on without getting on the floor
#1
Super Member
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 3,502
I had the quilt that I am getting ready for the frame draped over it and thought that I needed to move it to the floor to measure the borders. Then I thought... do it right where it is.
I made sure it was nice and straight across the center bar, smoothed it all out, and layed the first border strip across it. I pinned on one end (after squaring up that side of the border), smoothed it across, pinned it and made a tiny snip with the scissors. I stuck a pin in by the snip so I could find it when I moved it to the sewing room to cut it square. I then used that strip to cut the other one.
This picture is doing the other two sides after sewing on the first two. Really nice to just bring up the edge of the quilt and stand or sit to pin the borders on while the whole quilt can be layed out straight.
I made sure it was nice and straight across the center bar, smoothed it all out, and layed the first border strip across it. I pinned on one end (after squaring up that side of the border), smoothed it across, pinned it and made a tiny snip with the scissors. I stuck a pin in by the snip so I could find it when I moved it to the sewing room to cut it square. I then used that strip to cut the other one.
This picture is doing the other two sides after sewing on the first two. Really nice to just bring up the edge of the quilt and stand or sit to pin the borders on while the whole quilt can be layed out straight.
#2
Doh!
Now that you've mentioned it, it seems so obvious, how could we not think of it before! lol
Thank you, I'm going to use that technique too... no more crawling around on the floor and no more having to vacuum all the dog hair up before laying a quilt down.
Now that you've mentioned it, it seems so obvious, how could we not think of it before! lol
Thank you, I'm going to use that technique too... no more crawling around on the floor and no more having to vacuum all the dog hair up before laying a quilt down.
#4
Super Member
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 3,502
Yep, I thought of doing that for the backing too. Should be a WHOLE lot easier than trying to do it on the floor. Just drape the backing on the frame first and put the top over it to size it.
About the vacuuming... that was part of the inspiration of using the frame. If I was going to lay it on the floor I needed to vacuum first. I didn't want to do that right then but I wanted to get the border done.
About the vacuuming... that was part of the inspiration of using the frame. If I was going to lay it on the floor I needed to vacuum first. I didn't want to do that right then but I wanted to get the border done.
#5
Super Member
Join Date: Nov 2007
Location: Rhode Island
Posts: 9,186
I LOVE your log cabin and your border is a great choice.
That is the way I do my borders. I was always getting different measurements when I tried measuring on the floor!
I must tell you again, I LOVE your log cabin.
That is the way I do my borders. I was always getting different measurements when I tried measuring on the floor!
I must tell you again, I LOVE your log cabin.
#7
Power Poster
Join Date: Jan 2008
Location: Florida
Posts: 17,636
getting in line, right behind K, cause with rain, couldn't work on front porch, so have had a piece of wall board (4 x 8), on dining room table, for past 3 days, but can't walk around it. I can't get on floor, but don't have that much room anyway. So, I have been rolling, and rolling, quilt up, to move, move, move. Exhausting, so I leave pc online, now, cell is on, and go back and forth...back and forth! :D
#9
Super Member
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 3,502
The board sounds good for several different uses and I plan on making one soon. I believe I have a 4' square piece of MDF board left over from when I had to buy a 8' x 4' piece to make a headboard.
I can put a thin layer of batting on it, maybe a couple layers of Warm & Natural, and tightly cover it with some high quality muslin I have. I want a large board for ironing, specifically for squaring up blocks and larger pieces when needed.
I can put a thin layer of batting on it, maybe a couple layers of Warm & Natural, and tightly cover it with some high quality muslin I have. I want a large board for ironing, specifically for squaring up blocks and larger pieces when needed.
Thread
Thread Starter
Forum
Replies
Last Post
karensue
Pictures
174
08-16-2011 08:59 PM
Krystyna
General Chit-Chat (non-quilting talk)
77
07-26-2011 11:25 AM