Stuck Bobbin
#1
Member
Thread Starter
Join Date: Jun 2017
Posts: 1
Stuck Bobbin
I have a Singer Quantum 9960 that takes class 15 bobbins. I put a bobbin on the rewinding post and wound it. Now, I can't get it off! I realized too late that the bobbin I used was a 15J bobbin. I can't move the bobbin up or down. A little metal piece showed up in the middle of the post that looks like a hook. I have no clue how to remove the bobbin. Someone please help!!
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
It might have to go to the repairman. If you want to try it yourself, I would remove all the thread off it first. If it won't turn to remove the thread, cut it off with an exacto knife. Once the thread is all off you can better see what you are doing. I would then destroy the bobbin. If you have a Dremel set with the small attachments, I would use a cutting tool to cut into the bobbin and stop just before it gets to the winder. You can then pull off the bobbin in pieces. Good Luck!
#3
Super Member
Join Date: Jan 2012
Posts: 4,783
I think Tartan gave you spot-on advice. It's what I would try to do. That little metal hook is probably what is supposed to fit into a slot cut into the sides of the bobbin so the spindle can turn it. On my machines (none are Singers) they are on the outside of the spindle. I hope that hook didn't get damaged. If so, it may need to go to the hospital anyways.
#4
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
I have a Singer Quantum 9960 that takes class 15 bobbins. I put a bobbin on the rewinding post and wound it. Now, I can't get it off! I realized too late that the bobbin I used was a 15J bobbin. I can't move the bobbin up or down. A little metal piece showed up in the middle of the post that looks like a hook. I have no clue how to remove the bobbin. Someone please help!!
Thread
Thread Starter
Forum
Replies
Last Post