FYI: Jammed-up Singer 404 was rust + lint in bobbin case
#1
FYI: Jammed-up Singer 404 was rust + lint in bobbin case
Singer 404 -- The workhorse straight-stitcher so tough that even junior high school home ec students can't kill one, right? That's what I thought when I bought it. But I could not get that machine to free up the least little bit. 6 months later, she moves. What was it? Copious quantity of lint left in the bobbin case (lint, not thread) had absorbed moisture and rusted the parts together. And the hook was seized in the wrong position so that I could not remove the bobbin case. Could not turn the hand wheel, could not make the bobbin case even rattle in there. Nothing would move. I doused the entire machine with sewing machine oil and then Liquid Wrench, but gave up when it still would not move 3 weeks later. I forgot about it until last weekend, and was pleased to find that after about 6 months the seized parts finally let go. I will have to lightly steel-wool a few areas. I scraped a boatload of oily lint out of there
There is a warning in the Singer 404 manual to clean out the lint so as not to get rust in there, lol. Other Slants might have the same issue.
I found that 404 in a used furniture store. Nice looking 404 in a nice cabinet, with attachments and a slant buttonholer with it. The motor was good, the cabinet was decent, but that machine as jammed up so tight that nothing would move at all.
The store owner made me an offer I could not refuse: $5 for the entire package. Such a deal!
So, if you run across a really siezed-up 404 and the motor still runs, now you know what to do: Act disinterested, furrow your brow, offer $5 ,"because it might have a broken gear or something." LOL
There is a warning in the Singer 404 manual to clean out the lint so as not to get rust in there, lol. Other Slants might have the same issue.
I found that 404 in a used furniture store. Nice looking 404 in a nice cabinet, with attachments and a slant buttonholer with it. The motor was good, the cabinet was decent, but that machine as jammed up so tight that nothing would move at all.
The store owner made me an offer I could not refuse: $5 for the entire package. Such a deal!
So, if you run across a really siezed-up 404 and the motor still runs, now you know what to do: Act disinterested, furrow your brow, offer $5 ,"because it might have a broken gear or something." LOL
#2
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
It is nice when you can win one. Yes high school girls can destroy sewing machines. I bought out a school's machines one time - I think I had a good dozen of those Singer 404 machines - none of them worked. I got all but 2 two to work - those two donated all kinds of little parts for the others. I suppose if I bought parts the other two would work - then again I don't know I let Wilbur at one of them with a screw driver once. Anyway here is a link for one of the last: http://www.quiltingboard.com/vintage...e-t206688.html
Once they sew they are nice little machines - great for learning to sew - not very heavy either.
Once they sew they are nice little machines - great for learning to sew - not very heavy either.
#4
Super Member
Join Date: Jan 2007
Location: near Richmond ,Virginia
Posts: 1,315
got me singer 185k,1957 m0del......................got it home woulnt run. got twenty yrs lint out of it and oil,oil,oil.....took off not bad for 14.99 and included cabinet and original manuals,wonderful straight stitch
#5
Hey, just wanted to say that 404 is a runnin' sonuvagun now, ha! Smooth and also an unusually quiet motor. Probably that machine never got much use. I scrubbed the dirt off it last night while watching Mad Men.
Thread
Thread Starter
Forum
Replies
Last Post
KalamaQuilts
For Vintage & Antique Machine Enthusiasts
10
06-09-2014 04:38 PM
Cecilia S.
For Vintage & Antique Machine Enthusiasts
39
06-05-2014 05:34 AM
craftybear
Links and Resources
1
10-09-2011 05:03 PM