Grover and Baker treadle
#51
Senior Member
Join Date: Sep 2011
Location: Central NY
Posts: 859
I think that would bring good money on ebay....NOT on CL....not in my area anyway. Anyway, we all know it's "worth" what you can get at any time and place. Our family motto is: "Buy high and sell low." I VERY VERY seldom get what I paid, even when it's refurbished and sewing perfectly.
#54
Senior Member
Join Date: Nov 2013
Location: SF Bay Area
Posts: 586
steveh. you should have a separate thread for your G&B restoration. we're excited to see the before and after with photos.
#55
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Page 3 has a bunch of the photos of the before. if folks want more let me know. This machine so far has been cleaned with sewing Machine oil on everything, and wadding polish (with a little brasso as an accelerant) on the metal parts.
Last edited by SteveH; 11-26-2013 at 01:42 PM.
#56
Senior Member
Join Date: Nov 2013
Location: SF Bay Area
Posts: 586
?? this is the separate thread for the G&B.....
Page 3 has a bunch of the photos of the before. if folks want more let me know. This machine so far has been cleaned with sewing Machine oil on everything, and wadding polish (with a little brasso as an accelerant) on the metal parts.
Page 3 has a bunch of the photos of the before. if folks want more let me know. This machine so far has been cleaned with sewing Machine oil on everything, and wadding polish (with a little brasso as an accelerant) on the metal parts.
#57
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
no stress.
So one of the members here "has a friend with an issue" hehe Actually her friend has a G&B Chainstitch like mine (except her's works). However, her G&B is missing the slide plates. They are using cardstock as temps...(shudder)
So last night I cut out a couple of blank sets. We have a notcher here at work so I will make the square cuts on the long plate today at lunch.
Because screw-ups happen I made two sets to hopefully get at least one correct set.
Because the notches are going to be a bit tricky to get square and correct, I made an extra one of those just in case
[ATTACH=CONFIG]448922[/ATTACH]
So one of the members here "has a friend with an issue" hehe Actually her friend has a G&B Chainstitch like mine (except her's works). However, her G&B is missing the slide plates. They are using cardstock as temps...(shudder)
So last night I cut out a couple of blank sets. We have a notcher here at work so I will make the square cuts on the long plate today at lunch.
Because screw-ups happen I made two sets to hopefully get at least one correct set.
Because the notches are going to be a bit tricky to get square and correct, I made an extra one of those just in case
[ATTACH=CONFIG]448922[/ATTACH]
#58
Banned
Join Date: Oct 2012
Location: San Lorenzo, CA
Posts: 5,361
Great news!! IT MOVED!!!!! The presser foot bar that was still frozen solid FINALLY moved. it lifted up 1/4"
It only took 10 days of every other day dousings with Kriol and KrudKutter and daily wiggles and taps from every direction I could.
It is still stuck but it moved, which means it WILL move smoothly eventually.. This machine Will sew.
[ATTACH=CONFIG]448923[/ATTACH]
Also the thread guide is now clean and oh look! there is a slot for thread now that it is cleaned out...
[ATTACH=CONFIG]448924[/ATTACH]
It only took 10 days of every other day dousings with Kriol and KrudKutter and daily wiggles and taps from every direction I could.
It is still stuck but it moved, which means it WILL move smoothly eventually.. This machine Will sew.
[ATTACH=CONFIG]448923[/ATTACH]
Also the thread guide is now clean and oh look! there is a slot for thread now that it is cleaned out...
[ATTACH=CONFIG]448924[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
SewMachines
For Vintage & Antique Machine Enthusiasts
6
11-25-2015 01:21 PM
SteveH
For Vintage & Antique Machine Enthusiasts
23
08-27-2015 05:14 PM
SteveH
For Vintage & Antique Machine Enthusiasts
43
03-16-2015 11:06 AM
SteveH
For Vintage & Antique Machine Enthusiasts
42
08-08-2013 10:42 PM