Help getting the Needle back in to sew!
#1
Help getting the Needle back in to sew!
Help I think that I am going crazy. I broke a needle or was cleaning can't remember now but tried to replace the needle and it won't go up in its spot. I got frustrated and put her on the shelf for another day now she is back out and I really want to sew on her but I can't get the needle back in. What could I possible be doing wrong I have replaced thousands of needles. This one dosn't want to go back in so what am I doing wrong?
#3
#5
Power Poster
Join Date: Jul 2008
Location: Northern Indiana
Posts: 20,306
Can you slide a thin mirror under the "throat" area to see what is happening as you try to put the needle in - or turn the machine on its side ? Do you have the needle turned the right way - the flat side in the right direction ?
#7
The machine is a 301 Singer and I have checked and rechecked the directions the flat part goes to the back of the machine on this model. I have tipped the machine on its side and couldn't see any thing. I will try the mirror though. I just can't believe I am having all this trouble when I never have before.
#8
I don't know anything first hand about 301's, but I do know the 319 and 306 had an odd "bit" extra thing in the needle clamp that definitely has to go in the correct way, and can be very fussy to get just right, but those models have a set screw as well as the thumb screw..... I know there are a TON of 301 users out there though that should be able to say for certain.
#9
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
The machine is a 301 Singer and I have checked and rechecked the directions the flat part goes to the back of the machine on this model. I have tipped the machine on its side and couldn't see any thing. I will try the mirror though. I just can't believe I am having all this trouble when I never have before.
http://www.ismacs.net/singer_sewing_...ine-manual.pdf
Thread
Thread Starter
Forum
Replies
Last Post
luvTooQuilt
Member Swaps and Round/Row Robins
30
12-18-2013 04:22 PM