How do you treadlers do it?
#11
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Didn't seem to help any. I might just try cleaning it some more. That can't hurt. And I think I could shorten the belt a bit more too.
Joe
#13
Joe, what did you clean it with? I think I ended up using alcohol and that stopped the slippage - I probably had some oil on there somewhere.
#14
The leather belt will probably help you a lot. When you first get it, take an end in each hand and stretch it across your shoulders. If you stretch it enough, you probably won't have to adjust the belt for a good long while afterward.
Then, practice. A lot. Sew without thread or chain-piece blocks or whatever you want to do. After a couple of days, you'll be able to sew one stitch at a time using only the treadle.
The 66-1 has no reverse, so to strengthen the ends of seams, either turn them 180° and sew back for half an inch or (as my grandmother taught me) just pull on the fabric to slow the feed for the last half inch - this puts the stitches very close together.
Honest, you'll get the hang of treadling very soon with a little practice. I love using the treadle when I need to pay attention to where every stitch will go.
Or when the power goes out. Last time we lost power for a few hours, the other humanoids in the house were whiny and bored but I couldn't hear them - I sat and sewed with my iPod in, listening to old radio shows from the 30's & 40's.
Have fun with it and don't be discouraged - you feel like you have a couple of extra feet at first, but that goes away pretty fast.
Then, practice. A lot. Sew without thread or chain-piece blocks or whatever you want to do. After a couple of days, you'll be able to sew one stitch at a time using only the treadle.
The 66-1 has no reverse, so to strengthen the ends of seams, either turn them 180° and sew back for half an inch or (as my grandmother taught me) just pull on the fabric to slow the feed for the last half inch - this puts the stitches very close together.
Honest, you'll get the hang of treadling very soon with a little practice. I love using the treadle when I need to pay attention to where every stitch will go.
Or when the power goes out. Last time we lost power for a few hours, the other humanoids in the house were whiny and bored but I couldn't hear them - I sat and sewed with my iPod in, listening to old radio shows from the 30's & 40's.
Have fun with it and don't be discouraged - you feel like you have a couple of extra feet at first, but that goes away pretty fast.
#15
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
#17
Linda, do you stop with the treadle horizontal or at the top/bottom of the stroke? I realize you can't always stop with your feet in a specific position but when I can I try to stop with the treadle horizontal. My legs (I'm actually getting the two foot thing down at last) seem to remember which way they were going and I almost always start up again going the right direction. In fact, with that revelation I'm going to try the 9W (opposite throw of the hand wheel) again since I won't need to help start it by hand as often.
Thanks for the advice!
#18
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Linda, one of the things I usually do is watch carefully and as I come to the end of the seam, I'll reach over and grab the hand wheel and stop it before it goes too far.
Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.
pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.
Joe
Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.
pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.
Joe
#19
Linda, one of the things I usually do is watch carefully and as I come to the end of the seam, I'll reach over and grab the hand wheel and stop it before it goes too far.
Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.
pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.
Joe
Also when you start again, turn the hand wheel to get the machine going then take over with the treadle. Some of my machines I can start them by the pedal and they'll go the right direction. The one I was working with last night was being a cranky so and so and wanted to stall and turn backwards. So I ended up using the hand wheel a lot more than normal.
pinkcastleDH,
I haven't paid any attention to where the foot pedal is when I stop either. I'll pay more attention to it when next I use a treadle.
Joe
Thread
Thread Starter
Forum
Replies
Last Post
ruby2shoes
Main
25
09-20-2015 04:01 PM
Fab-ra-holic
General Chit-Chat (non-quilting talk)
42
06-22-2011 09:23 AM