Kenmore E Cams
#1
Member
Thread Starter
Join Date: May 2018
Posts: 1
Kenmore E Cams
I have a Kenmore sewing machine 158.15030. I am looking for the E cams. These are the double sided flat cams with about a 7/8” donut hole in the center. I have the #1 cam but looking for others which will do decorative stitching.
#2
I have a 158.13410. I think the cams are the same. These are gray and some are single side and some are two sided.
I'll check. I think I have an extra set.
I just checked but I guess I sold my extra set. I found the on Ebay. There are numerous different types. These are grey but some are orange or other colors. Sorry I couldn't be of more help.
I'll check. I think I have an extra set.
I just checked but I guess I sold my extra set. I found the on Ebay. There are numerous different types. These are grey but some are orange or other colors. Sorry I couldn't be of more help.
Last edited by MaggieLou; 05-16-2018 at 06:36 AM.
#4
Junior Member
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
Kenmore made a ton of E cam machines. Should be able to find them on that auction site, or local advertising, even etsy will probably have them, and as MaggieLou inferred, they were made in several different colors. They come up often on the Goodwill Auctions site as well.
Last edited by Steelsewing; 10-23-2018 at 11:08 AM.
#6
Member
Join Date: Dec 2020
Posts: 1
I've had this machine for decades, but it came with the wrong manual. I've had no luck finding the correct manual. The manual for the 1503 does not include instructions on using the cams. I would be so grateful to find a link to the correct version after all these years.
#7
1503 Manual
I've had this machine for decades, but it came with the wrong manual. I've had no luck finding the correct manual. The manual for the 1503 does not include instructions on using the cams. I would be so grateful to find a link to the correct version after all these years.
I have a manual. If you will PM me with your address I'll copy the manual and send it to you.
#8
Junior Member
Join Date: Feb 2012
Location: North Manchester, IN
Posts: 199
The machine had gotten rusted and locked up in storage.
Rusty pieces broke off the machine trying to get it moving so it was thrown out.
I have no idea what model it was.
Vrolandelli If you can use them I would be glad to send them to you.
Please PM with your address.
If you cannot use them please post here and I will send them to the first person that can use them to PM me.
Thread
Thread Starter
Forum
Replies
Last Post
Lostn51
For Vintage & Antique Machine Enthusiasts
3
03-25-2020 09:01 AM
theoldgraymare
For Vintage & Antique Machine Enthusiasts
0
04-17-2012 06:07 PM