National Two Spools CAN
#1
National Two Spools CAN
These are a series of photos of the Two Spools case (or CAN) that is used in the race area of the sewing machine. Instead of a bobbin a spool of thread is placed in the spool case.
[ATTACH=CONFIG]313065[/ATTACH]
[ATTACH=CONFIG]313066[/ATTACH]
[ATTACH=CONFIG]313067[/ATTACH]
The race where the can sits onto the pin.
[ATTACH=CONFIG]313068[/ATTACH]
Placement onto pin located in the race.
[ATTACH=CONFIG]313069[/ATTACH]
Bottom of can in place.
[ATTACH=CONFIG]313070[/ATTACH]
Top of can in place.
[ATTACH=CONFIG]313065[/ATTACH]
[ATTACH=CONFIG]313066[/ATTACH]
[ATTACH=CONFIG]313067[/ATTACH]
The race where the can sits onto the pin.
[ATTACH=CONFIG]313068[/ATTACH]
Placement onto pin located in the race.
[ATTACH=CONFIG]313069[/ATTACH]
Bottom of can in place.
[ATTACH=CONFIG]313070[/ATTACH]
Top of can in place.
#5
The feed dogs on this machine can be dropped, but I have never done so. I use this machine for piecing since the foot is the perfect 1/4'' and the feed dogs are the same length. Since the feed dogs are the same length, the material feeds in evenly. My FMQ is done best on my Singer 15-90 and my Necchi Supernova. Different machines have different jobs.
#6
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
#10
Eldredge made the Two Spools and later the company became National. National continued to make the Two Spools.
There are some Two Spools machines with the name Eldredge and some with National.
[ATTACH=CONFIG]313561[/ATTACH][ATTACH=CONFIG]313562[/ATTACH]
There are some Two Spools machines with the name Eldredge and some with National.
[ATTACH=CONFIG]313561[/ATTACH][ATTACH=CONFIG]313562[/ATTACH]
Thread
Thread Starter
Forum
Replies
Last Post
Boop56
Member Swaps and Round/Row Robins
40
12-04-2019 07:20 PM
tjbosley
For Vintage & Antique Machine Enthusiasts
2
02-07-2017 11:07 AM
Monroe
For Vintage & Antique Machine Enthusiasts
6
07-26-2013 06:29 PM
Mom3
For Vintage & Antique Machine Enthusiasts
4
04-06-2013 05:53 PM
Monroe
For Vintage & Antique Machine Enthusiasts
4
11-03-2012 10:45 AM