Necchi Super Nova 1950 model
#1
Member
Thread Starter
Join Date: Jul 2012
Location: Lawrenceville, GA
Posts: 30
Necchi Super Nova 1950 model
I don't know if this is the correct forum for this inquiry, but a friend of mine has a Necchi Super Nova 1950 model sewing machine and needs a Motor Belt. This isn't quite the vintage of the machines I have seen here but it is vintage and I was wondering if any one would know of the possibility of a source for parts for this type of machine. It was her mothers and it means alot to here.
Thanks, anna
Thanks, anna
#2
Try posting this question at the Yahoo Necchi group. Someone there will know. Here is the link: http://groups.yahoo.com/group/necchisewingmachineclub/
#3
Senior Member
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
Just measure the belt and order a singer et. al. belt. It is universal. I know I used a Generic belt on mine and it worked fine. The motor adjustment is a bit tricky because there is very little give so a very close fit is needed.
#4
Junior Member
Join Date: Feb 2012
Location: Bunker Hill, IL
Posts: 101
I just recently got a belt for a Necchi Nora. I posted on the Necchi yahoo group with the measurements and received a response suggesting the belt I should get and it works just fine. I measured the distance with string around where the belt goes and also measured the outer dimension of the old belt. I was told they use the outer belt measurement. Anyway, I just ordered a generic belt in the size suggested to me from a Necchi group member and it works fine after putting it on and adjusting the motor to it.
Thread
Thread Starter
Forum
Replies
Last Post
Suziebee
For Vintage & Antique Machine Enthusiasts
4
11-03-2018 02:46 PM
Puffie40
For Vintage & Antique Machine Enthusiasts
1
03-23-2018 11:41 AM
SnowQuilt
For Vintage & Antique Machine Enthusiasts
7
12-27-2011 08:51 AM