Need help..
#1
Need help..
I bought this machine and want to see if I can fix it..Can someone give me some information about it???the # on it is G7344889. The gold paint is rubbed off on it..It had 2 shuttle bobbins that are kinda rusty...and needs a belt..I know that for sure..Guess I need to know where to start??? Thanks
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
The ISMACS site { http://www.ismacs.net/singer_sewing_...-database.html } shows your serial number to be a Singer 127. It was 1 of 50,000 allotted August 28, 1919.
The belt, bobbins, some screws, and a few other parts are available at Sew-Classics. Many of us recommend Tri-Flow oil rather than other sewing machine oils. It's also available at Sew-Classics.
The gold "paint" is / was actually a decal. The paint is not so much a paint but a Japan finish. Go to Skips thread here:
{ http://www.quiltingboard.com/vintage...s-t186522.html } to read about it.
Do not use abrasives, or strong chemical cleaners on the surface as the original paint and decals were once covered with shellac and that is long gone. There is no protection to what is left.
Use cotton balls or a very soft cloth and oil to clean the machine exterior. For the interior you might need to use denatured alcohol or a solvent such as Hoppe's #9 to clean it.
The 127 I have was so caked with old oil the only thing that would touch it was the gun cleaning solvent. Took me quite a while to get it clean enough to actually use it.
Here is a thread I did about it: { http://www.quiltingboard.com/vintage...ml#post5673486 }
I'd start by oiling everything that moves or is supposed to move with Tri-Flow. Then go from there.
Joe
The belt, bobbins, some screws, and a few other parts are available at Sew-Classics. Many of us recommend Tri-Flow oil rather than other sewing machine oils. It's also available at Sew-Classics.
The gold "paint" is / was actually a decal. The paint is not so much a paint but a Japan finish. Go to Skips thread here:
{ http://www.quiltingboard.com/vintage...s-t186522.html } to read about it.
Do not use abrasives, or strong chemical cleaners on the surface as the original paint and decals were once covered with shellac and that is long gone. There is no protection to what is left.
Use cotton balls or a very soft cloth and oil to clean the machine exterior. For the interior you might need to use denatured alcohol or a solvent such as Hoppe's #9 to clean it.
The 127 I have was so caked with old oil the only thing that would touch it was the gun cleaning solvent. Took me quite a while to get it clean enough to actually use it.
Here is a thread I did about it: { http://www.quiltingboard.com/vintage...ml#post5673486 }
I'd start by oiling everything that moves or is supposed to move with Tri-Flow. Then go from there.
Joe
#4
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Muv's videos are really good. They are located in the sticky notes or you can go on this link:
http://www.quiltingboard.com/vintage...v-t167789.html
http://www.quiltingboard.com/vintage...v-t167789.html
#5
Super Member
Join Date: Aug 2009
Location: Martinsville, Indiana
Posts: 1,430
Good luck with your machine. You've gotten some great advice here and will get more from this wonderful site as you need it. You've come to the right place. Are you hooked to the vintage machines yet? Better watch out, or you will be. They become addictive! And there are a lot of enablers here in the vintage area!!
#10
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Yeah I got a real good deal on that one from SA that time you & Elaine came to town... I noticed you passed up the treadle...
Thread
Thread Starter
Forum
Replies
Last Post
blzzrdqueen
Main
39
01-19-2015 12:51 PM
earlylace
Main
10
07-15-2010 01:19 PM
sunnyhope
Main
7
07-24-2009 07:15 AM