Need help with vintage Singer
#1
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Central Kentucky
Posts: 132
Need help with vintage Singer
I picked this one up a a yard sale today, no idea what t is. It has a rotary hook like the 201 but with a different retaining bracket. The tension dial and hand wheel clutch both have different parts from the standard Singer.
#2
There is a blog that has lots of pictures of a 101 and some information at http://steelsewing.blogspot.com/2018...chine-101.html
A manual can be found at https://www.singer.com/support
Janey - Neat people never make the exciting discoveries I do.
Not affiliated with off-site link(s)
#4
Indeed. I'm wondering if it ever did work? While the part is called Bobbin Winder Bracket (belt cover), I'm pretty sure the hand wheel wasn't made for a belt. It doesn't look like the hand wheel is shaped to accept a belt. Also it doesn't look like the belt would have a clear path to the motor as the Bobbin Winder Bracket looks to be in the way.
Janey - Neat people never make the exciting discoveries I do.
Janey - Neat people never make the exciting discoveries I do.
#6
Good luck, particularly since the wheel does not have a groove for the belt. I don't have a clue about the bobbin case on the 101. I don't have one, not sure even seen in real life. Have you tried youtube?
Janey - Neat people never make the exciting discoveries I do.
Janey - Neat people never make the exciting discoveries I do.
#7
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Central Kentucky
Posts: 132
Ive cleaned the hook and bobbin case fairly well without disassembly. I would still like to take them apart just incase I have a tread jam in the future. Does anyone have any suggestions?
#9
Senior Member
Join Date: Apr 2020
Location: South of St Louis
Posts: 839
If you take the bobbin case apart any further do so with parts inside of a bin of some kind, I find this much better than dropping those tiny screws onto the floor where they seem to become invisible. But, unless you see some crud or thread underneath, "if it ain't broke don't fix it" might be a good adage to apply.