New Treadle belt
#1
New Treadle belt
Where do I buy a new treadle belt? My MIL just gave me her grandmothers White treadle and I don't know a thing about treadles. I so want to play with it but the belt is old so it has stretched and needs to be replaced.
#2
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
You can order them but an old singer repair shop might have one. Someone on QB said aquarium hose works also. If you go to www.quiltville.blogspot.com Bonnie Hunter collects old machines and she has a list of her sources for parts on her site under the tabs at the top of the page.
#3
Any local sewing machine shop likely sells them. That's where I bought mine. A search for "treadle belt" will likely return several online sources as well.
Also, you can probably undo the metal clip, cut the old belt down some, and reattach the clip. Just make sure to cut the end without the metal clip.
Also, you can probably undo the metal clip, cut the old belt down some, and reattach the clip. Just make sure to cut the end without the metal clip.
#5
Super Member
Join Date: Feb 2012
Posts: 8,091
My LSMG has a bunch of them. However if you don't have a LSMG you can order them from Sew-Classic: { http://www.shop.sew-classic.com/ }
Joe
Joe
#6
Super Member
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
Lucky you. Now, when you go to install the new belt, please be very careful about putting the hole in the new belt. I was using an ice pick to do that and it slipped and stabbed me in the meaty part of my hand just below the thumb. Talk about feeling dumb. I was just about to stop as I was thinking this was not a smart way to do the hole (Yes, I was holding the dang belt in one hand and the ice pick in the other) when it happened. Thankfully the puncture was not too bad and my tetanus shot was up to date. So, just be careful, please!
#7
Senior Member
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
I get mine from Ebay, they are fine. I use a dremel with a tiny tiny drill bit and it works just fine. Yes, you can injure yourself if not careful. Keep in mind that the belt doesn't need to be super tight..just enough to turn the handwheel.
#8
I've had to install three so far and hadn't thought of putting an ice pick through my hand. I have stuck a needle into my finger at least four times, though. There has to be a leather punch specifically designed to put a hole in these slippery little suckers.
#9
Senior Member
Join Date: Nov 2011
Location: South East Michigan...at the bottom of the thumb!
Posts: 730
I bought a belt at Yoders in shipshawana when we were there. My DH installed it for me...yes, he did poke his finger with the awl!! I understand there is a tool that you use to install. We do not have one. So now that it is installed I am learning to treadle. It is hard!! I have a lot of respect for the early pioneer sewers!
#10
Super Member
Join Date: Aug 2010
Location: North Central, NC
Posts: 2,741
Yes, you are right. There is a specific tool for punching that hole in the belt. I don't know what they cost but if I ever have to fit another treadle belt, you can bet I will be looking for one!!! Or ..... I will get my DH to do it as he has lots of tools and can figure out how best to do just about anything.
Thread
Thread Starter
Forum
Replies
Last Post
justflyingin
Main
8
08-09-2011 09:36 PM
quiltingbee12
Main
5
04-18-2009 02:54 PM