pott motor rewire.
#1
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Mountain View, Oklahoma
Posts: 559
pott motor rewire.
I have a singer 15-91 sewing machine that I bought from a lady on this board. The bobbin winder had broken in shipping. I found a bobbin winder frame from an old 201-2 and they interchanged. It even came with a wirking motor. The lead wire that goes to the motor on the new frame is brittle. can you rewire these? Where can I get information on these.
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
PATTIESPEARL,
Here is a link to forum member Rayn or Rain ( can't remember which ) blog where he give very concise and detailed instructions on how to rewire motors, including the potted motors.
{ http://vssmb.blogspot.com/search/label/rewiring }
And then a thread I did not long ago with a few comments about rewiring them.
{ http://www.quiltingboard.com/vintage...r-t205360.html }
They might look complicated, but in reality they are very easy. Just follow the instructions in the blog.
Joe
Here is a link to forum member Rayn or Rain ( can't remember which ) blog where he give very concise and detailed instructions on how to rewire motors, including the potted motors.
{ http://vssmb.blogspot.com/search/label/rewiring }
And then a thread I did not long ago with a few comments about rewiring them.
{ http://www.quiltingboard.com/vintage...r-t205360.html }
They might look complicated, but in reality they are very easy. Just follow the instructions in the blog.
Joe
#3
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
I have a singer 15-91 sewing machine that I bought from a lady on this board. The bobbin winder had broken in shipping. I found a bobbin winder frame from an old 201-2 and they interchanged. It even came with a wirking motor. The lead wire that goes to the motor on the new frame is brittle. can you rewire these? Where can I get information on these.
Jon
#4
Super Member
Join Date: Dec 2011
Location: Northern CA near Sacramento
Posts: 1,107
PATTIESPEARL,
The potted motor from the 201-2 and the 15-91 are identical and interchangeable, but the bobbinwinder is not.
The bobbinwinder parts are fairly easy to remove from the old broken 15-91 assembly and put on the 201-2's motor assembly. I have done this a fewl times.
Cathy
The potted motor from the 201-2 and the 15-91 are identical and interchangeable, but the bobbinwinder is not.
The bobbinwinder parts are fairly easy to remove from the old broken 15-91 assembly and put on the 201-2's motor assembly. I have done this a fewl times.
Cathy
I have a singer 15-91 sewing machine that I bought from a lady on this board. The bobbin winder had broken in shipping. I found a bobbin winder frame from an old 201-2 and they interchanged. It even came with a wirking motor. The lead wire that goes to the motor on the new frame is brittle. can you rewire these? Where can I get information on these.
#5
Senior Member
Thread Starter
Join Date: Jun 2010
Location: Mountain View, Oklahoma
Posts: 559
I did take the frame that I bought that came from the 201-s and installed it onto the 15-91. The bobbin winder works great, am just concerned about the brittle wire ot the motor on that one. In my mind, I should be able to take the motor with the good wire and put it into the frame that I now have on the machine. I have already tried the jb weld twice on the old frame. it sits at such a funny angle that the winder would not work.
#7
Super Member
Join Date: Aug 2011
Location: Millville, NJ
Posts: 1,835
Thread
Thread Starter
Forum
Replies
Last Post
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
8
12-01-2015 09:32 AM
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
10
10-30-2015 08:36 PM
miriam
For Vintage & Antique Machine Enthusiasts
45
04-09-2014 11:52 PM