singer featherweight $200
#1
Super Member
Thread Starter
Join Date: Oct 2011
Location: Hampstead N.C.
Posts: 1,870
singer featherweight $200
Saw a posting on local yard sale featherweight $200. Looks real nice in picture. He said can't test it because the foot petal cord is stiff. What do you all think? I know it's a good price if it works. I know replacing that wire is no big deal, but don't know if anything else is wrong with it. What should I look for? I'm no expert for sure. Thanks
#2
Junior Member
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
The foot pedal is an easy fix/replacement. The balance wheel needs to turn 360 degrees with out any issue. It can be a -little- stiff, but not crazy difficult - or completely free.
The needle bar needs to go up and down when you spin the balance (hand) wheel 360 degrees. This would mean that the internals are at least connected and it's not locked up.
Make certain that the machine has a bobbin carrier. Bobbins themselves are cheap, replacement bobbin carriers for a FW?... not so cheap. Any bits, bobs, attachments, carry case and etc. are a plus.
Hopefully others will chime in because I'm not the FW expert. FW's are getting harder and harder to find in that price range. Usually it's 350 and up. It would help if the machine presents well. Nice paint/decals etc. =)
Last edited by Steelsewing; 08-09-2018 at 07:24 AM.
#3
Super Member
Join Date: Aug 2013
Location: Florida
Posts: 5,973
Take someone with you. I once was trying to purchase off of Craigslist and got spooked about the location. Not a good spot to show up with cash. That was here in Florida. It could have been legit but you never know.
#4
Super Member
Thread Starter
Join Date: Oct 2011
Location: Hampstead N.C.
Posts: 1,870
Well I bought this for 180. he took 20 off because of the foot control really a clean shiny machine. The machine has some sort of short in the foot petal, I think. The machine just keeps running even when you take your foot off the foot petal.
#6
Junior Member
Join Date: Jul 2018
Location: SW Pennsyltuckey
Posts: 111
Here's a QB thread about wiring diagrams
https://www.quiltingboard.com/blogs/jljack-1349.html
with a very nice pic of the where the wires are supposed to go on a 221.
If the pedals wires are on the wrong posts.... it won't stop running.
#7
Super Member
Join Date: Sep 2015
Posts: 1,963
Keep the foot pedal, it's a classic issue; remove the capacitor inside and it will behave again. In some cases the capacitor can be placed near the three pin plug socket on the machine. If a machine looks nice and reasonably complete I often take the chance. Wiring can be replaced, the Featherweight is notorious for freezing up; it's often just a tiny bit of thread caught in the bobbin-hook area, it's a bit fuzzy, but the area is accessable with a bit disassembling and what ever causing the freezup usually comes out with a bit of tweezer work.
#8
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Or maybe it could be that the wires inside the controller are touching. I love the button controllers. Issues with them are most often an easy fix. BTW, I've never had a machine or a controller with a capacitor in it. Not common here.
Cari
Cari
Thread
Thread Starter
Forum
Replies
Last Post
toverly
For Vintage & Antique Machine Enthusiasts
18
11-23-2013 04:36 PM
TinkerQuilts
For Vintage & Antique Machine Enthusiasts
6
05-26-2012 08:23 PM
moonrise
Links and Resources
1
09-26-2010 05:46 AM