Singer Motor Lube - A discussion
#41
Here is the video that is a test of the lub. https://vimeo.com/channels/april1930s/143510151
I really would like to lub the motor of my old Singer as I haven't done it yet.
I really would like to lub the motor of my old Singer as I haven't done it yet.
#42
Yes, I've seen the video. In the video, they mentioned the need for a low temperature melting point and then they notably left out petroleum jelly that has the same melting point as the original Singer lube (the UK formula, I suspect because the US one seems to melt higher than 115F)
They and the other person selling a reformulated lube say not to use PJ but others who don't sell their own product - as well as smarter people than me - say PJ is fine.
Without testing the reproduction products personally, I can't give an opinion on them and I'm not purchasing them because the price landed in Canada will be between $35 and $40 per tube. It is worth noting though that many people have been using PJ for years as well as White motors with grease tubes calling for PJ.
The electrical motor shop told me today that unless the wicks are really different, there's fundamentally no difference between a Singer motor and a White motor as far as their requirements.
They and the other person selling a reformulated lube say not to use PJ but others who don't sell their own product - as well as smarter people than me - say PJ is fine.
Without testing the reproduction products personally, I can't give an opinion on them and I'm not purchasing them because the price landed in Canada will be between $35 and $40 per tube. It is worth noting though that many people have been using PJ for years as well as White motors with grease tubes calling for PJ.
The electrical motor shop told me today that unless the wicks are really different, there's fundamentally no difference between a Singer motor and a White motor as far as their requirements.
#44
In all honesty, I have trust issues which is why I see one thing that is blatantly untrue with a person - I automatically distrust anything else from the same person unless it can be proven otherwise. It MAY be fine. It might be a great product. I don't know at this point.
How much you use in your motor will be determined by the grease tubes. The best way to learn about that part is by following Rain's tutorial here: http://vssmb.blogspot.ca/2012/01/com...ted-motor.html
ETA: I just re-read part 19. (It's been a long time since I followed the posts but I've recommended then to people over the years) Add him to the list of people who recommend PJ.
Steps 9 and 19 will be the relevant ones but I find the whole tutorial worth reading because you'll learn a ton about your motor. Far more than I want to type out here. Ideally, I would clean out the lube and clean and inspect the worm gear and commutator, etc as Rain shows in the tutorial. It's the only way to guarantee a good result. Consider that there's a good chance there's still some of the original lube in there is up to the age of that motor - potentially over 70 years old.
The Singer Lube you just ordered - if it's white like what I showed on the previous page - should still be suitable for gears (though it's not my first choice of greases for gears either.)
DH brought up a good point as to a potential why as far as the US and UK formulas having different melting points:
"Back in the day", most UK countries would a lower average indoor temperature for most months than say Texas in the summer. In the years before AC, I bet in parts of Texas a tube of lube that melted at 115F might have been liquid in the tube. That would not be fun to try to get into a motor - especially a potted motor.
How much you use in your motor will be determined by the grease tubes. The best way to learn about that part is by following Rain's tutorial here: http://vssmb.blogspot.ca/2012/01/com...ted-motor.html
ETA: I just re-read part 19. (It's been a long time since I followed the posts but I've recommended then to people over the years) Add him to the list of people who recommend PJ.
Steps 9 and 19 will be the relevant ones but I find the whole tutorial worth reading because you'll learn a ton about your motor. Far more than I want to type out here. Ideally, I would clean out the lube and clean and inspect the worm gear and commutator, etc as Rain shows in the tutorial. It's the only way to guarantee a good result. Consider that there's a good chance there's still some of the original lube in there is up to the age of that motor - potentially over 70 years old.
The Singer Lube you just ordered - if it's white like what I showed on the previous page - should still be suitable for gears (though it's not my first choice of greases for gears either.)
DH brought up a good point as to a potential why as far as the US and UK formulas having different melting points:
"Back in the day", most UK countries would a lower average indoor temperature for most months than say Texas in the summer. In the years before AC, I bet in parts of Texas a tube of lube that melted at 115F might have been liquid in the tube. That would not be fun to try to get into a motor - especially a potted motor.
Last edited by ArchaicArcane; 02-02-2016 at 10:42 PM.
#45
Super Member
Join Date: Sep 2015
Posts: 1,963
Do you use the very soft PJ or the slightly more solid type? There seem to be two types when I buy it at the grocery store or drug store.
Last edited by Mickey2; 02-02-2016 at 11:44 PM.
#46
I also ordered new Singer All Purpose Machine Oil for oiling the parts on my machine. In your experience is this okay, or should I get oil that says "sewing machine oil" vs just "all purpose machine oil?"
This is the one I ordered
http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
Thank you guys so much! It's relieving to have people who have had the experience with old sewing machines help me wade through this stuff.
This is the one I ordered
http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
Thank you guys so much! It's relieving to have people who have had the experience with old sewing machines help me wade through this stuff.
#47
I'm not positive that Teflon won't clog the wicks, so I wouldn't use it in a wick situation. Tri-flow oil does leave a residue in my syringes that has to be shaken up and mixed in or it clogs the syringe. I don't know if that's the Teflon or the paraffin or some other additive though.
I'm really not a connoisseur of PJ. I bought probably my first batch of it in easily 15 years tonight and that's because I wanted squeeze tube for filling some syringes for my VM maintenance class next week. The 15 yr old tub isn't empty. Yeah, I'm lazy and I paid the surcharge for the laziness. I think it might be worth trying to test to see how they melt comparatively and use the one that melts the most to your satisfaction.
I'm really not a connoisseur of PJ. I bought probably my first batch of it in easily 15 years tonight and that's because I wanted squeeze tube for filling some syringes for my VM maintenance class next week. The 15 yr old tub isn't empty. Yeah, I'm lazy and I paid the surcharge for the laziness. I think it might be worth trying to test to see how they melt comparatively and use the one that melts the most to your satisfaction.
#48
I also ordered new Singer All Purpose Machine Oil for oiling the parts on my machine. In your experience is this okay, or should I get oil that says "sewing machine oil" vs just "all purpose machine oil?"
This is the one I ordered
http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
Thank you guys so much! It's relieving to have people who have had the experience with old sewing machines help me wade through this stuff.
This is the one I ordered
http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
Thank you guys so much! It's relieving to have people who have had the experience with old sewing machines help me wade through this stuff.
If that's the case, get an oral syringe from your pharmacy (that's the one with the curved tip and no luer-lok for a needle on it) and put the oil in there to dispense it - Like the syringe Rain shows on his page about refilling the grease tubes. All I use these days are syringes for oiling and greasing machines - way more accurate except when I'm initially filing them. At that point, I should be behind a blast shield.
#50
Super Member
Join Date: Feb 2012
Posts: 8,091
Here is the video that is a test of the lub. https://vimeo.com/channels/april1930s/143510151
I really would like to lub the motor of my old Singer as I haven't done it yet.
I really would like to lub the motor of my old Singer as I haven't done it yet.
{ http://www.novamontgomery.com/shop/S...t-x4312153.htm }
I've got a 15-91 that's in need of a major servicing and I need motor lube. I wonder who's I should try?
Joe
Thread
Thread Starter
Forum
Replies
Last Post
Beautiful_Sound
For Vintage & Antique Machine Enthusiasts
10
10-30-2015 08:36 PM
miriam
For Vintage & Antique Machine Enthusiasts
45
04-09-2014 11:52 PM
Dollyo
For Vintage & Antique Machine Enthusiasts
2
11-13-2013 02:31 PM