Tension problem I think?
#1
Super Member
Thread Starter
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
Tension problem I think?
I have been trying to quilt using my old Singer 201, 301 and 15-91. I have the proper walking foot for these machines but when I get ready to quilt it seems like after sewing a block or so the walking begins to push the top layer forward and eventually causes a pucker in the line of quilting. This also causes the lines in the top to be skewed somewhat. When I turn the quilt over it seems like the stitch on the back of the quilt is kind of gathered like. I don't know if this is a tension problem in the bobbin or not. The stitches are perfect so I hesitate to bother the tensions. I have included a picture of this problem along with a picture of where I have the top pressure bar set. I really want to be able to quilt on these machines but I can't seem to find out what the problem is so I can correct it.
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
Elaine and I conspired ...... 'er conferred about this.
First the bottom puckering is caused by the top thread tension being too loose. I'd also suggest opening up the stitch length a bit.
The walking foot tension may be too tight. Rather than pulling the fabric through in sync with the feed dogs it's pushing it ahead of itself.
There is also a possibility the quilt sandwich is too thick for the distance between the walking foot and bed.
Another thing to do, ( I've done this on my quilted treadle cover ) is to keep the material gently taught with your fingers as it's feeding through the machine.
Joe
First the bottom puckering is caused by the top thread tension being too loose. I'd also suggest opening up the stitch length a bit.
The walking foot tension may be too tight. Rather than pulling the fabric through in sync with the feed dogs it's pushing it ahead of itself.
There is also a possibility the quilt sandwich is too thick for the distance between the walking foot and bed.
Another thing to do, ( I've done this on my quilted treadle cover ) is to keep the material gently taught with your fingers as it's feeding through the machine.
Joe
#3
Super Member
Thread Starter
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
Is the walking foot tension the top thread tension. I am using WN for my batting so I wouldn't think it would be too thick. I really haven't adjusted the thread tension because the stitches are so good and I don't want to mess that up. I guess I really need to know what the walking foot tension is
#4
Super Member
Join Date: Feb 2012
Posts: 8,091
No the presser foot tension and top thread tension is too different things.
Puckering on the top or bottom is a sign of thread tension problems. The stitches can look good, but if it puckers or curls there's an imbalance.
The walking foot tension is adjusted by the presser foot tension adjuster that you showed in the third picture.
Joe
Puckering on the top or bottom is a sign of thread tension problems. The stitches can look good, but if it puckers or curls there's an imbalance.
The walking foot tension is adjusted by the presser foot tension adjuster that you showed in the third picture.
Joe
#5
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
There were lots of good suggestions on the thread you started previously about this. http://www.quiltingboard.com/vintage...ml#post5910933
Thread
Thread Starter
Forum
Replies
Last Post
ruby2shoes
Main
25
09-20-2015 04:01 PM