Treadle sewing machine cleaning
#1
You are all so wise, I'm needing advice. We found an old Davis vertical shuttle treadle at a garage sale for next to nothing. BUT, it is greasy and dirty (and I mean icky!!) and has a huge water stain on the wood top. How do I clean all this and or restore the finish?
Also, the only info on this machine would indicate that it is from the late 1800s. Thoughts?
Also, the only info on this machine would indicate that it is from the late 1800s. Thoughts?
#2
Moderator
Join Date: Mar 2008
Location: North East Lower peninsula of Michigan
Posts: 6,231
Billy is going to restore a machine and do a tutorial for us go to this site
http://www.quiltingboard.com/t-43881-1.htm
http://www.quiltingboard.com/t-43881-1.htm
#3
Very fine steel wool.... "0000". Homer's furniture refinisher, in a dark walnut color.
Using the steel wool, apply the Homer's, rubbing with the grain of the wood. You may have to repeat it several times, wiping the wood dry each time.
When it's looking the way you want it to, finish up with Homer's Beeswax and Orange oil...following the directions.
Don't sand the veneer. veneer is so thin that it's easy to wear completely through it.
That's a beautiful machine!
Using the steel wool, apply the Homer's, rubbing with the grain of the wood. You may have to repeat it several times, wiping the wood dry each time.
When it's looking the way you want it to, finish up with Homer's Beeswax and Orange oil...following the directions.
Don't sand the veneer. veneer is so thin that it's easy to wear completely through it.
That's a beautiful machine!
#4
Originally Posted by Charlee
Very fine steel wool.... "0000". Homer's furniture refinisher, in a dark walnut color.
Using the steel wool, apply the Homer's, rubbing with the grain of the wood. You may have to repeat it several times, wiping the wood dry each time.
When it's looking the way you want it to, finish up with Homer's Beeswax and Orange oil...following the directions.
Don't sand the veneer. veneer is so thin that it's easy to wear completely through it.
That's a beautiful machine!
Using the steel wool, apply the Homer's, rubbing with the grain of the wood. You may have to repeat it several times, wiping the wood dry each time.
When it's looking the way you want it to, finish up with Homer's Beeswax and Orange oil...following the directions.
Don't sand the veneer. veneer is so thin that it's easy to wear completely through it.
That's a beautiful machine!
#5
Do an "all over"...it's not going to be a complete refinish, you'll be darkening the areas that are bleached out, and oiling the wood at the same time.
If it doesn't turn out the way you want, then you're going to have to get more drastic, and I'm not the one to tell you how to do that...but I'll bet Billy can! :)
If it doesn't turn out the way you want, then you're going to have to get more drastic, and I'm not the one to tell you how to do that...but I'll bet Billy can! :)
Thread
Thread Starter
Forum
Replies
Last Post
lakekids
For Vintage & Antique Machine Enthusiasts
0
07-03-2012 08:41 AM
Tallbald
For Vintage & Antique Machine Enthusiasts
5
11-17-2011 04:09 AM