Viking 758
#1
Viking 758
If anyone has any leads on what kind of bobbin case this machine uses, or a manual - I would be most grateful.
I have tried the bobbin case from my singer 15 and it fits. Tried the needle in all directions and no luck. Cant get the beast to sew.
I have tried the bobbin case from my singer 15 and it fits. Tried the needle in all directions and no luck. Cant get the beast to sew.
#3
Senior Member
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
http://www.ebay.com/itm/12-VINTAGE-V...-/150673871441
I think these are the ones....special bobbins but I could be wrong. No affiliation with seller. Good luck.
I think these are the ones....special bobbins but I could be wrong. No affiliation with seller. Good luck.
#7
The bobbins you tried go to a treadle? My Viking 6010 takes bobbins that look very similar to the 'L' bobbins that my 319w uses, but they were not the same bobbins. I had to buy Viking bobbins for that machine. Before you give up, I'd get a few vintage Viking bobbins. Have you tried Sew Classic for vintage Viking bobbins?
Nancy
Nancy
#8
Well, used all your suggestions & got it working. I had to adjust the timing and got it sewing after using a lot of thread. I used up a whole bobbin fiddling with the hook that when I reached for the next bobbin and then it wouldn't sew again....
So I held the bobbins side by side and there was a slight difference! Sews a beautiful SS.
The bobbin closest to the needle is the one which works - less holes? I wonder if this kind has a number?
So I held the bobbins side by side and there was a slight difference! Sews a beautiful SS.
The bobbin closest to the needle is the one which works - less holes? I wonder if this kind has a number?
Last edited by vanginney; 02-05-2013 at 02:17 PM.
Thread
Thread Starter
Forum
Replies
Last Post