Vintage Sewing Machine Shop.....Come on in and sit a spell
I found a 1957 brown and tan 301 in a cabinet that grandma used for $175. Is this a fair price?
Originally Posted by hobbykat1955
Does anyone have an Elna Grasshopper...I just purchased one this morning complete with case that turns into a sewing table with original paper work and booklets...I found it on Esty for 85 in mint condition and did research that it's like a Featherweight in weight made by the Swiss. Then found one on ebay that was already up to 150 with two days to go...So on impulse I bought it on Esty...Hope I made the right decision...
Oh mine fit the attachments/feet I bought for quilting on my vintage singer 15-91. This is a definite plus.
Originally Posted by QuilterGary
I found a 1957 brown and tan 301 in a cabinet that grandma used for $175. Is this a fair price?
Super Member
Join Date: Nov 2010
Location: Milton DE
Posts: 3,189
Originally Posted by Annaquilts
Originally Posted by hobbykat1955
Does anyone have an Elna Grasshopper...I just purchased one this morning complete with case that turns into a sewing table with original paper work and booklets...I found it on Esty for 85 in mint condition and did research that it's like a Featherweight in weight made by the Swiss. Then found one on ebay that was already up to 150 with two days to go...So on impulse I bought it on Esty...Hope I made the right decision...
Oh mine fit the attachments/feet I bought for quilting on my vintage singer 15-91. This is a definite plus.
Originally Posted by MarieM
Hi folks, I made it to the thrift store yesterday and test drove both the Singer 301 and Necchi Alco 400 (not really vintage in my book). I told the owner I'd thread both machines, adjust the tension and make sure they both ran. The singer had some electrical issues and seemed a little sluggish, so I opted to leave that one at the store. The Necchi, that I wasn't really interested in was like a work horse. It was quiet, smooth, kinda like driving a luxury car, so I brought that one home. All that to get to the question: I want to get some cams for it, I've looked on E-Bay the sellers for the ones listed don't know which machine they are for. Are the cams for the Necchi interchangeable or are the specific to each model? I'd appreciate any information. Thanks in advance.
Marie M.
Marie M.
Originally Posted by QuilterGary
http://chicago.craigslist.org/wcl/for/2293752305.html
I think this is high but it sure is a nice looking machine.
Anyone interested?
I think this is high but it sure is a nice looking machine.
Anyone interested?
Originally Posted by hobbykat1955
Does anyone have an Elna Grasshopper...I just purchased one this morning complete with case that turns into a sewing table with original paper work and booklets...I found it on Esty for 85 in mint condition and did research that it's like a Featherweight in weight made by the Swiss. Then found one on ebay that was already up to 150 with two days to go...So on impulse I bought it on Esty...Hope I made the right decision...
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
Originally Posted by Glenn
Originally Posted by OmaForFour
Thanks for trying to help me out! I did find a place with a conversion kit which is a piece that attaches so that you can use side loading attachments. It won't harm the machine and it can always be changed back to its original. I thought I might try that. Thanks again.
That sure is a nice red eye you have there unfortunately the back clamping attachments are not made anymore and are very hard to find. Sometimes you can find them on ebay and in antique stores. It took me almost two years to find attachments for my red eye. I was lucky some very nice and generous members of this board helped me in finding some. Glenn
I spent a bunch of time online today looking for these (while this board was down ALL DAY!!) and found... nothing. Your best bet might be to buy a whole sewing machine that is in poor condition, but has all the feet with it. A donor machine. My 1908 66 also takes the back clamping feet...
Originally Posted by sewbizgirl
Originally Posted by Glenn
Originally Posted by OmaForFour
Billy,
I just got a 1914 Singer Red Eye with the back clamping feet.
I wondered if you would know where I can purchase additional pieces for it such as a quarter inch foot etc etc.
Do they make these for my machine to accomodate the latest type of quilting on a machine if you know what I mean?
I bought a walking foot that I can use on my Featherweight for example.
I hope this pic comes through.
I just got a 1914 Singer Red Eye with the back clamping feet.
I wondered if you would know where I can purchase additional pieces for it such as a quarter inch foot etc etc.
Do they make these for my machine to accomodate the latest type of quilting on a machine if you know what I mean?
I bought a walking foot that I can use on my Featherweight for example.
I hope this pic comes through.
Thanks,
Sharon W.
Originally Posted by Annaquilts
Originally Posted by hobbykat1955
Does anyone have an Elna Grasshopper...I just purchased one this morning complete with case that turns into a sewing table with original paper work and booklets...I found it on Esty for 85 in mint condition and did research that it's like a Featherweight in weight made by the Swiss. Then found one on ebay that was already up to 150 with two days to go...So on impulse I bought it on Esty...Hope I made the right decision...
Oh mine fit the attachments/feet I bought for quilting on my vintage singer 15-91. This is a definite plus.
http://www.grandmotherssewingmachine...asshopper.html
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
Originally Posted by MarieM
Hi folks, I made it to the thrift store yesterday and test drove both the Singer 301 and Necchi Alco 400 (not really vintage in my book). I told the owner I'd thread both machines, adjust the tension and make sure they both ran. The singer had some electrical issues and seemed a little sluggish, so I opted to leave that one at the store. The Necchi, that I wasn't really interested in was like a work horse. It was quiet, smooth, kinda like driving a luxury car, so I brought that one home. All that to get to the question: I want to get some cams for it, I've looked on E-Bay the sellers for the ones listed don't know which machine they are for. Are the cams for the Necchi interchangeable or are the specific to each model? I'd appreciate any information. Thanks in advance.
Marie M.
Marie M.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM