Vintage Sewing Machine Shop.....Come on in and sit a spell
Need Help With This Machine
I am posting a picture of my dh's grandmother's 1901 Singer treadle machine and a picture of the shuttle area in the hopes that someone can tell me what model it is and what type of shuttle I need to find for it. Otherwise, the machine is in working condition although it does need to be cleaned up, oiled and lubricated.'
Oh, oh, I can help on this one! The model is a 27. The decaling is known as either the Sphinx, Memphis or Egyptian. You'll need a 3/16" belt and the needle is the common 15x1. Bobbin is the S228 and the shuttle is 8327.
My teachers/mentors will be along shortly to grade my answers :-) I'm so hoping I passed.
(I recently came into custody of one of these darlings.)
Enjoy,
best,
d
My teachers/mentors will be along shortly to grade my answers :-) I'm so hoping I passed.
(I recently came into custody of one of these darlings.)
Enjoy,
best,
d
Hi all,
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
I know, I know, Charlee got you all to wondering what's new in my world but I already spilled the beans in the title.
We have a local 'rag' called Uncle Henry's (UH) that is similar to Craigslist where folks buy, trade and sell. My dh's brother called yesterday to say he saw a 'White' treadle for sale in New Hampshire. Not that I need another machine but something made me hop onto the UH's website - btw, if you're not a subscriber, you only get to view some of the posts. I spied this machine. HOLY HANNAH!! I don't know much yet about A & V machines but I knew this machine doesn't come a dime a dozen (please pardon the cliche). I tried getting hold of my not-so-local mentor for her opinion and advice but imagine, she probably has a life :-) So a quick drive by the ATM for cash and we're off. The seller's asking price was $85. He was thrilled to hear I would be using her and not reselling it. The price agreed upon by the men left enough to pay our entrance into the dance last night - can you imagine?! I would have paid the $85 and split town so fast before the seller had a chance or wanted to renig.
She's a darling little thing and I can't wait to try her out. Dh found a length of belt (so I can skip the too-skinny pantyhose idea) so the only thing left to do is to get her slide plates opened and change the bobbin winder ring. We have her setting with some lub along the plate edges. If you have any suggestions, please, let me know. We have tried a dowel and rubber mallet and tapping in the finger groove but she's fairly locked in. The shuttle is in place. With the exception of the marring on the front slide plate she looks pretty darn good. Her table will need some work come spring time. The seller says there was a 'box of attachments and stuff' that is in the attic. He promised to try and locate it and call me with seven days. What a guy!
Enjoy!
And a huge 'Thank you and a hug' to my west coast friend, who wrote back 'OMG!! GO GET IT!!!!!!!!!!!
best,
d
Texas Jan
My wife has had two of those stands for years. Never used them. She's got a 5 thread Singer 14UXXXX Quantum jam-a-matic serger that she doesn't use that often, and it's got it's own cone mounts.
She's been using the Coats and Gutermann machine quilting thread on her quilts that come on the cardboard tubes. Those tubes just flop around on the spool pins so I've been drilling out the 3/8" dowel rod pieces for those.
Works really good. Keeps the big hole spools nice and straight.
We've also got some of the smaller cones that have a big hole on the bottom and a smaller hole on top. The thread on those is perfect for the felt bags I make but that plastic cone flops around something awful. So I made some adapters for that using the dowel rod and cut off rims of larger spools.
I order a lot of my stuff from Sew-Classic and they have spool pins for the Singers that use the tap in pin with holes in them for use when use the large cones with the stands. Well, according to their text that helps keep the tension consistent by following the same path you'd use with the standard thread spools.
But - what if your machine has a good spool pin? Sure not going to yank it out just to put one in with a hole, so I was yacking with my wife and had an epiphany. I headed down to the basement and in 10 minutes had the little adapter built. Tried it out and it works great.
I've not tried the big cones with just the stand, it's kind of like the adapter came first then I hunted up the thread to try it.
As for worrying about the strength of the thread, not at all. I've tried it in two of my Singer 66s, one electric and one treadle and it's not broken once. I also tried it in my HOTHER and it flowed through the the mechanism slick as a greased door nob. The singers have the horizontal bobbin set up which is a bit harder on the thread and it's tension, I had to adjust them both. The HOTHER has the vertical bobbin set up and it didn't need anything.
Now my wife wants me to make another one so she can use some of the bigger spools on the 319K.
Joe
She's been using the Coats and Gutermann machine quilting thread on her quilts that come on the cardboard tubes. Those tubes just flop around on the spool pins so I've been drilling out the 3/8" dowel rod pieces for those.
Works really good. Keeps the big hole spools nice and straight.
We've also got some of the smaller cones that have a big hole on the bottom and a smaller hole on top. The thread on those is perfect for the felt bags I make but that plastic cone flops around something awful. So I made some adapters for that using the dowel rod and cut off rims of larger spools.
I order a lot of my stuff from Sew-Classic and they have spool pins for the Singers that use the tap in pin with holes in them for use when use the large cones with the stands. Well, according to their text that helps keep the tension consistent by following the same path you'd use with the standard thread spools.
But - what if your machine has a good spool pin? Sure not going to yank it out just to put one in with a hole, so I was yacking with my wife and had an epiphany. I headed down to the basement and in 10 minutes had the little adapter built. Tried it out and it works great.
I've not tried the big cones with just the stand, it's kind of like the adapter came first then I hunted up the thread to try it.
As for worrying about the strength of the thread, not at all. I've tried it in two of my Singer 66s, one electric and one treadle and it's not broken once. I also tried it in my HOTHER and it flowed through the the mechanism slick as a greased door nob. The singers have the horizontal bobbin set up which is a bit harder on the thread and it's tension, I had to adjust them both. The HOTHER has the vertical bobbin set up and it didn't need anything.
Now my wife wants me to make another one so she can use some of the bigger spools on the 319K.
Joe
Nancy
Here are her pictures. She came to live with the other girls about the time of our big snowstorm and power outage. I had not even brought her in from the garage, MY BAD. Will get her cleaned up tonight and put the power to her after some oiling.
The badge says SEAWOL SEWING SUPPLIES, Deluxe Model, Sold Throughout the World. On the side of the piller under the wheel at the botton is a decal that says SEAWOL Model B15- (the last part is missing). The motor is a BELGELCOR Type W73.
As you can see she has not been cleaned up and I did not even unwrap the foot controller. She does have enough pin rash that the Sew is missing from Sewmagic. And the spool pin is bent.
The badge says SEAWOL SEWING SUPPLIES, Deluxe Model, Sold Throughout the World. On the side of the piller under the wheel at the botton is a decal that says SEAWOL Model B15- (the last part is missing). The motor is a BELGELCOR Type W73.
As you can see she has not been cleaned up and I did not even unwrap the foot controller. She does have enough pin rash that the Sew is missing from Sewmagic. And the spool pin is bent.
Nancy
Everything about this machine is interesting! It is so simple in design, yet so fabulous.
But here's the BIG NEWS! I just got all three slide plates off!!!!! Wahoo. I'm stoked. We didn't put her belt on today in case we had to take her off the table to try budging her plates. But hold your breath folks, I'm going belt her up, thread 'er up and give her a go tomoree.
Obviously with the plates off we were able to access the shuttle. Indeed there is a bobbin in there but God's truth, I'm scared to death looking and trying to figure out how the shuttle is threaded. ISMACS, here I come. If anyone has experience with this type of shuttle and you feel like jawing, I'm a captive audience :-)
You know, four weeks ago there wasn't a treadle in the house. Now there are, um, some. It's sorta like sauerkraut, you love treadling or you hate it. I equate it with my first experience at a Pow-Wow. The first drum beat I heard woke up my insides like nothing I have ever experienced. That is how these machines are to me. I talk about them to my 'elder' friends and they look at me like I lost it. Sorta like motorcycling - if you don't ride, it can't be explained.
Keep your fingers crossed for me. I don't know if I'll be able to sleep tonight with all this excitement. Wahoo!! (as she lets out a loud, happy yelp.)
best,
d
Enjoy!
But here's the BIG NEWS! I just got all three slide plates off!!!!! Wahoo. I'm stoked. We didn't put her belt on today in case we had to take her off the table to try budging her plates. But hold your breath folks, I'm going belt her up, thread 'er up and give her a go tomoree.
Obviously with the plates off we were able to access the shuttle. Indeed there is a bobbin in there but God's truth, I'm scared to death looking and trying to figure out how the shuttle is threaded. ISMACS, here I come. If anyone has experience with this type of shuttle and you feel like jawing, I'm a captive audience :-)
You know, four weeks ago there wasn't a treadle in the house. Now there are, um, some. It's sorta like sauerkraut, you love treadling or you hate it. I equate it with my first experience at a Pow-Wow. The first drum beat I heard woke up my insides like nothing I have ever experienced. That is how these machines are to me. I talk about them to my 'elder' friends and they look at me like I lost it. Sorta like motorcycling - if you don't ride, it can't be explained.
Keep your fingers crossed for me. I don't know if I'll be able to sleep tonight with all this excitement. Wahoo!! (as she lets out a loud, happy yelp.)
best,
d
Enjoy!
Nancy
Last edited by BoJangles; 02-20-2012 at 06:20 AM.
Wow, y'all have been busy.
Some notes,
Nancy, have you tried a different brand metallic thread. When I have done decorative stitches with my Elna on Christmas tree skirts, one brand of metallic thread would be terrible and the next work amazingly well. It wasn't the machine. .
Some notes,
Nancy, have you tried a different brand metallic thread. When I have done decorative stitches with my Elna on Christmas tree skirts, one brand of metallic thread would be terrible and the next work amazingly well. It wasn't the machine. .
Did you try putting your slide plate on from the needle side? Some slide plates go on from the needle side and not from the left toward the bed - but from the needle side toward the outside.
Nancy
Kathie, are you selling that Free Westinghouse? http://sacramento.craigslist.org/for/2860551130.html
Nancy
Nancy
I am posting a picture of my dh's grandmother's 1901 Singer treadle machine and a picture of the shuttle area in the hopes that someone can tell me what model it is and what type of shuttle I need to find for it. Otherwise, the machine is in working condition although it does need to be cleaned up, oiled and lubricated.'
Nancy
I am posting a picture of my dh's grandmother's 1901 Singer treadle machine and a picture of the shuttle area in the hopes that someone can tell me what model it is and what type of shuttle I need to find for it. Otherwise, the machine is in working condition although it does need to be cleaned up, oiled and lubricated.'
Don't use anything but sewing machine oil to clean her with!! After you have her cleaned, use a good resin type of car wax (non abrasive) to polish and protect her remaining decals.
I have to say, I'd give up every machine I own to have my grandmother's machine...what a special treasure you have!!
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM