Vintage Sewing Machine Shop.....Come on in and sit a spell
Member
Join Date: Mar 2012
Location: sf bay area, california
Posts: 93
pat
Member
Join Date: Mar 2012
Location: sf bay area, california
Posts: 93
Pat,
I think it’s called a model “No. 1”. Here’s a look at the front of mine...
CD in Oklahoma
[QUOTE=pfroggg;5078851]Ok, I found Thomas Book I. She mentions that the 'American Girl' variant was offered in Montgomery Ward catalogs from 1928 through 1938, but that the 'Damascus' variant appeared in the MW catalogs of 1939, 1940, and 1941. So these little guys apparently were made into the 1940s (she gives the Damascus manufacture dates as 1930s-1940s). I'm not sure of the production dates of the full-size Damascus machines, but National may have introduced this variant to coincide with some promotion of its larger cousin.
Thank you Pat and Cathy! Very interesting! So my little Damascus was made anywhere between the 1920's to the 1940's? If book 1 estimates the dates between 1920's to 1930's, then book 2 says 1930's to 1940's, I am going to go with Book 1 since according to the owner his grandmother made doll clothes with the machine in the 1920's after getting the machine as a gift. If you guys see in Book 2 that for sure my machine was made later than the 1920's, I want to know! This is fun!
Oh Cathy, according to ISMACS needle site, the Damascus TSM takes a 16x1 needle, which to me would be way too big?
Nancy
Thank you Pat and Cathy! Very interesting! So my little Damascus was made anywhere between the 1920's to the 1940's? If book 1 estimates the dates between 1920's to 1930's, then book 2 says 1930's to 1940's, I am going to go with Book 1 since according to the owner his grandmother made doll clothes with the machine in the 1920's after getting the machine as a gift. If you guys see in Book 2 that for sure my machine was made later than the 1920's, I want to know! This is fun!
Oh Cathy, according to ISMACS needle site, the Damascus TSM takes a 16x1 needle, which to me would be way too big?
Nancy
Last edited by BoJangles; 03-21-2012 at 08:02 AM.
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
So, after cleaning the race and case on my Singer 201, I started to think if I should have done something similar on my Singer 66-1s. I spent a hour looking for the needed info, and discovered that the machine would benefit on cleaning and replacing the oil wick. This is something that needs to be done on 66s and 99s...unless they are just setting on shelf looking pretty- like mine are now. This may have been talked about before on this thread, but I can't remember it. So, heads up for those that are using their Singer 66 or 99 and have not checked the felt on the oil wick; it may need to be added or replaced.
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
That is the same with my FW, and so I found an old portable file box with extending handle and wheels that I put it in. Works great.
Super Member
Join Date: Apr 2007
Location: North Carolina - But otherwise, NOTW
Posts: 7,940
Have a question. I bought one of those cabinets with the inkwells in the drawer. Some idjit turned it into a writing desk but thankfully left the hinges and set screws possibly. I have a 201 in need of a cabinet. My question is were those cabinets designed with something underneath the machine like a curved piece of board or something? I have no idea and there isn't anything like that left in this cabinet. Am just curious and thanks in advance.
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
I think this is why the FW was much more popular than the 77MG. Yes, the case and attachments add to the total weight, but at least with the FW, it's not locked into a heavy wooden base. The 77MG is about a pound heavier to begin with, and then you add in the wooden base...and the cuteness factor of the FW...it's easy to see why women went with the FW over the 77. I have to say, the 77 does a very nice stitch and I'm going to play more with it as far as FMQ goes. But, since I have the "heavy" one and not the MG version, I guess it will have to stay in the cabinet it lives in.
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM