Vintage Sewing Machine Shop.....Come on in and sit a spell
Candace, would you sell one of the three??
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I'm bbbbbbaaaacccccckkkkkkkkkkk home!!!
that class was fun
I learned a lot!
that class was fun
I learned a lot!
Welcome home, Miriam! Can't wait to hear all about the class!
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
it's on my PDA http://www.quiltingboard.com/persona...s-t187563.html I posted a few things there. It was a good trip. I'm exhausted.
Super Member
Join Date: Feb 2012
Posts: 8,091
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Super Member
Join Date: Mar 2010
Location: Huntsville, AL
Posts: 2,609
Welcome home Miriam. Read your PDA and sounds like you had a great time learning to repair the machines now all you need is sewing repair shop business.
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
I have the habit of taking all the pressure off this spring as soon as I get a machine, and leaving it off while I clean, etc, and if it is going to sit around unused. It is probably a superstition, but it seems to me that the springs get some "spring" back if they are not under compression all the time. Most machines seem to have them too tight, anyway. Laura
Joe, thanks for suggesting Sew-Classic.
Treadlep, you are right, that spring is inside the metal tube on my 99. I had adjusted the knob screw but saw no results. After reading your post I removed that screw and poked on the rod and it barely moved. So I pulled the rod out and poked inside the tube with a dental pick. The spring felt like it was jammed, or caught, inside the tube, so I gently pushed and pulled at it until I felt movement. I replaced the rod and screw and now there is more pressure on the foot. I just wasn't happy with how much "play" the fabric had under the pressure foot and didn't think it was because the machine is being handcranked. Thank you for your help!
Treadlep, you are right, that spring is inside the metal tube on my 99. I had adjusted the knob screw but saw no results. After reading your post I removed that screw and poked on the rod and it barely moved. So I pulled the rod out and poked inside the tube with a dental pick. The spring felt like it was jammed, or caught, inside the tube, so I gently pushed and pulled at it until I felt movement. I replaced the rod and screw and now there is more pressure on the foot. I just wasn't happy with how much "play" the fabric had under the pressure foot and didn't think it was because the machine is being handcranked. Thank you for your help!
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Welcome back Miriam!
Junior Member
Join Date: Mar 2012
Location: San francisco Bay Area
Posts: 249
OK, send happy thoughts that the craigs list seller who has relisted his ad 3 times will actually deign to answer me, this time. why do they place ads when they don't want to sell things? Laura
Thread
Thread Starter
Forum
Replies
Last Post
Stitchnripper
Main
5
10-17-2018 09:01 AM
AngieS
Main
38
10-06-2011 10:06 PM
craftybear
Offline Events, Announcements, Discussions
34
09-09-2011 12:36 PM