1965 Singer 411G in original treadle spec: ) Rare??
#1
Member
Thread Starter
Join Date: May 2016
Posts: 9
1965 Singer 411G in original treadle spec: ) Rare??
[ATTACH=CONFIG]576799[/ATTACH]
Recent find here in UK. A 411G in original treadle spec in an Italian cabinet.
Has the different treadle balance wheel, no motor to drag, with belt groove and all the original parts/accessories. Including the chain-stitch throat plate & appropriate 503602 bobbin case.... And belt guard.
I didn't fully understand what I'd bought for a while. A 411G with no motor in a lovely Italian (Milano) treadle cabinet?? (I do have other slants: )
Here it is anyway. Can't be many people who would have bought a 411 with treadle spec in 1965??
So must be super rare?
Only trouble is that I cannot get my long legs under the body to treadle efficiently: (
[ATTACH=CONFIG]576802[/ATTACH]
I know lots of people do convert these 411s (& others) to Treadle but mine appears to be the orginal Singer specced model & therefore may be interesting here?
A most lovely machine in any case: )
Recent find here in UK. A 411G in original treadle spec in an Italian cabinet.
Has the different treadle balance wheel, no motor to drag, with belt groove and all the original parts/accessories. Including the chain-stitch throat plate & appropriate 503602 bobbin case.... And belt guard.
I didn't fully understand what I'd bought for a while. A 411G with no motor in a lovely Italian (Milano) treadle cabinet?? (I do have other slants: )
Here it is anyway. Can't be many people who would have bought a 411 with treadle spec in 1965??
So must be super rare?
Only trouble is that I cannot get my long legs under the body to treadle efficiently: (
[ATTACH=CONFIG]576802[/ATTACH]
I know lots of people do convert these 411s (& others) to Treadle but mine appears to be the orginal Singer specced model & therefore may be interesting here?
A most lovely machine in any case: )
Last edited by QuiltnNan; 07-19-2017 at 08:09 AM. Reason: PM
#2
Super Member
Join Date: Mar 2016
Posts: 2,893
What a neat find! It appears to be in beautiful condition. That's a treadle I could like. Do the built in zig-zag cams work?
Where does the belt go? There don't appear to be any holes anywhere...
bkay
Where does the belt go? There don't appear to be any holes anywhere...
bkay
Last edited by bkay; 07-19-2017 at 08:07 AM. Reason: additional question
#3
They are very rare in the USA, since they were made in Germany. Not sure about the UK.
Bkay - the belt is under the belt gaurd. Is really neat to see one that is in a treadle, that is one I'd find a way to fit into my collection if I came across one!
Bkay - the belt is under the belt gaurd. Is really neat to see one that is in a treadle, that is one I'd find a way to fit into my collection if I came across one!
#5
OH , Thanks Macybaby, I was right there with bkay. I'm stunned to know this was made anywhere.
olik have you considered making a riser for the entire cabinet? You could set it on books to figure out the height.
olik have you considered making a riser for the entire cabinet? You could set it on books to figure out the height.
#6
Super Member
Join Date: Mar 2016
Posts: 2,893
bkay
#7
Super Member
Join Date: Sep 2015
Posts: 1,963
1965 is the latest I have seen, at least if it can be confirmed, and the first Singer of this late date. I have suspected a few of the Bernina treadle cabinet I have seen have been late 50s. They are few and far between, but the odd zwing arm ziggzagger with various stitch selection features turn up. I know treadles were made most of the 1950s, but not a late as 1965.
#9
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Yes rare. I have an electric like it so it is neat to see one set up to treadle. I'd like to see a close up of it with that front belt guard removed. What does the upper front look like where the belt goes inside? What do the chain stitching parts look like? Did you try chain stitching?
#10
Member
Thread Starter
Join Date: May 2016
Posts: 9
Yes rare. I have an electric like it so it is neat to see one set up to treadle. I'd like to see a close up of it with that front belt guard removed. What does the upper front look like where the belt goes inside? What do the chain stitching parts look like? Did you try chain stitching?
Miriam, I will take some pics of the areas you asked for & post them shortly. As for chaining it works as it should. You need the appropriate throat plate of course, (503599) & the correct (hooked) 'bobbin case.' (503602)
As for raising it to fit my long legs, I don't think I can alter the cabinet to raise the table as you can on the traditional cast iron treadle base. I'm quite frustrated by that!! The cabinet is Italian made & quite beautiful to my eye. I've got some more details on my website here, if anyone is interested. A good few other interesting SMs also on there. And a contacts page, & if I can help in any way I certainly will: )
I love the slants & have ca 7 currently. Pity the 431s can't treadle....
Today I'm working on a very nice 319K, but will check this thread regularly from now on: )
John, in UK.
Thread
Thread Starter
Forum
Replies
Last Post
miriam
For Vintage & Antique Machine Enthusiasts
154
03-12-2014 07:43 AM
ArchaicArcane
For Vintage & Antique Machine Enthusiasts
81
09-02-2013 08:14 PM
ArchaicArcane
For Vintage & Antique Machine Enthusiasts
9
01-19-2013 10:11 AM