Anyone use transmission fluid?
#71
Member
Join Date: Jul 2012
Location: west central wisconsin
Posts: 25
johnm,
Question for you:
These samples you are watching, are they in covered containers or open to the air? You probably said, but I don't feel like re-reading 5 pages over again to find out.
I asked because I have many quarts of ATF, Marvel Mys Oil, and others that are years old and are not ambering or thickening at all. They are now just as they were when I bought them. Minus what I've used from the bottles of course.
Joe
Question for you:
These samples you are watching, are they in covered containers or open to the air? You probably said, but I don't feel like re-reading 5 pages over again to find out.
I asked because I have many quarts of ATF, Marvel Mys Oil, and others that are years old and are not ambering or thickening at all. They are now just as they were when I bought them. Minus what I've used from the bottles of course.
Joe
The oil samples are in clear "watch glasses", with a loosely fitting, clear, perforated, covering. The samples are upon a south facing bay window so that they are exposed to sunlight, open air, UV rays, and normal daily temperature changes. Solvent evaporation and oxidation can occur normally. When I stated that regular sewing oil is good enough for old, sm, I didn't mean to imply that I was looking for 100 year old oil to apply to my sm. A modern, plain sewing machine oil is far better than any oil that was available in the past. This is the reason for the research, I will know that the oils that I use are non gumming, at least during the span of my observation.
John
#73
This is really interesting. I'm glad you are doing it.
Hi Joe,
The oil samples are in clear "watch glasses", with a loosely fitting, clear, perforated, covering. The samples are upon a south facing bay window so that they are exposed to sunlight, open air, UV rays, and normal daily temperature changes. Solvent evaporation and oxidation can occur normally. When I stated that regular sewing oil is good enough for old, sm, I didn't mean to imply that I was looking for 100 year old oil to apply to my sm. A modern, plain sewing machine oil is far better than any oil that was available in the past. This is the reason for the research, I will know that the oils that I use are non gumming, at least during the span of my observation.
John
The oil samples are in clear "watch glasses", with a loosely fitting, clear, perforated, covering. The samples are upon a south facing bay window so that they are exposed to sunlight, open air, UV rays, and normal daily temperature changes. Solvent evaporation and oxidation can occur normally. When I stated that regular sewing oil is good enough for old, sm, I didn't mean to imply that I was looking for 100 year old oil to apply to my sm. A modern, plain sewing machine oil is far better than any oil that was available in the past. This is the reason for the research, I will know that the oils that I use are non gumming, at least during the span of my observation.
John
#74
http://www.paintdocs.com/docs/webPDF...pe=MSDS&lang=E
I agree. I'd like to see the outcome of this experiment. How long are you thinking of letting it sit?
Last edited by ArchaicArcane; 06-07-2014 at 06:17 PM. Reason: Added link to MSDS
#76
Senior Member
Join Date: May 2013
Posts: 670
#77
#78
Silly thing.
I know there is paraffin wax ... but isn't that different ... oh never mind. I was just pretty sure that paraffin was more than just a wax.
Still... wax on... wax off
I know there is paraffin wax ... but isn't that different ... oh never mind. I was just pretty sure that paraffin was more than just a wax.
Still... wax on... wax off
#79
Member
Join Date: Jul 2012
Location: west central wisconsin
Posts: 25
Then you don't want to use Tri-Flow, it has paraffin in it too.
http://www.paintdocs.com/docs/webPDF...pe=MSDS&lang=E
I agree. I'd like to see the outcome of this experiment. How long are you thinking of letting it sit?
http://www.paintdocs.com/docs/webPDF...pe=MSDS&lang=E
I agree. I'd like to see the outcome of this experiment. How long are you thinking of letting it sit?
John
Thread
Thread Starter
Forum
Replies
Last Post
betty32084
General Chit-Chat (non-quilting talk)
7
12-09-2015 11:01 AM
bearisgray
Main
3
12-12-2010 10:03 AM