Aqua Bel Air Style 414
#22
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
#23
#26
I'm bumping this back up. Does anybody know where to find a threading guide for this one? I have one of these branded Sewmor and I just can't seem to get it right. I haven't been lucky enough to trip over the right diagram yet.
#27
Senior Member
Join Date: Sep 2013
Location: Saskatchewan
Posts: 838
I'm just guessing, and hopefully someone that has this machine will give you better advice, but I think it would be something like this:
[ATTACH=CONFIG]442833[/ATTACH]
Go through thread guide 1, then down around the tensioner 2. Make sure your thread is through the tension wire loop thing 3, then under the metal bit at the bottom of the uptake 4. Go up through the takeup lever 5 (right to left), then back down through the squiggly wire 6. Behind the above-needle guide 7, through the needle (left to right), and you're done! Previous posts have mentioned that the needle goes in with the flat side to the right.
Hopefully someone else can confirm this, or perhaps has an actual diagram.
[ATTACH=CONFIG]442833[/ATTACH]
Go through thread guide 1, then down around the tensioner 2. Make sure your thread is through the tension wire loop thing 3, then under the metal bit at the bottom of the uptake 4. Go up through the takeup lever 5 (right to left), then back down through the squiggly wire 6. Behind the above-needle guide 7, through the needle (left to right), and you're done! Previous posts have mentioned that the needle goes in with the flat side to the right.
Hopefully someone else can confirm this, or perhaps has an actual diagram.
#30
I think I had 4 and 5 backwards and I'm going to re-change the needle again tomorrow. I'm not sure how it's in.
She and I have been together all day and we're going to go to bed angry. Thanks for your help Jennifer!
She and I have been together all day and we're going to go to bed angry. Thanks for your help Jennifer!
Thread
Thread Starter
Forum
Replies
Last Post
DawnFurlong
For Vintage & Antique Machine Enthusiasts
21
10-12-2020 06:10 AM
DawnFurlong
For Vintage & Antique Machine Enthusiasts
30
12-01-2016 05:26 AM
harrishs
For Vintage & Antique Machine Enthusiasts
13
06-16-2015 06:08 AM