Bernina 930 feed dogs
#1
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
![Default](/images/icons/icon1.gif)
I picked up a Bernina 930 Record for a song this weekend. But...it is missing the feed dogs. I've been able to find replacement parts all over NJ to make her whole, but I was hoping someone had the feed dogs for it...very hard to find. PM me if you have one.
#3
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
![Default](/images/icons/icon1.gif)
It's a long story. I got the machine from a person who dropped the bobbin into the machine and it was rattling. He brought it to two repair shops who screwed it up. It was such an easy repair it wasn't funny. I have the guy returning to the shop to try to retrieve the missing parts. I asked him for the number of the shop, and it he gives it to me, they are going to hear very unpleasant remarks from me. I will definitely get it running. It's just so disrespectful to treat this machine like a Kmart Special...
#7
![Default](/images/icons/icon1.gif)
There are two Yahoo Bernina groups for the vintage machines:
BerninaThirtySomethings (this is the most active)
bonosberninas
There are a couple of techs that are on it regular. They are quite often able to source parts for people who need them.
BerninaThirtySomethings (this is the most active)
bonosberninas
There are a couple of techs that are on it regular. They are quite often able to source parts for people who need them.
#9
Senior Member
Thread Starter
Join Date: Apr 2012
Location: Jersey Shore
Posts: 528
![Default](/images/icons/icon1.gif)
I have been working on it. They lost/broke the small metal pieces that mesh with the microswitches, so I had to manufacture the pieces...they are tiny and interface it with the housing. I broke down and ordered the feed dog but I am skeptical that I will get it...one place said yes, then no. I am stubborn so I'll get it. After that I need a small spring, and spoke to a bernina tech who said I could have one. Then it should be up and running.... I'll also need to get the knee bar but it will cost a fraction of the Ebay prices. Yes, I have tried to yahoo groups...no luck.
Singers are so much easier to get parts for.
Singers are so much easier to get parts for.
#10
![Default](/images/icons/icon1.gif)
Here is some info I asked about I sure hope this helps you. This is the part number I think your looking for. Good Luck.
Part No. 328.162.03
Bernina Feed Dogs - Model(s): 930 -
Bin:22B-X Price: $ 22.50
http://sewing-machine-parts-store.co...bcat=Feed+Dogs
Part No. 328.162.03
Bernina Feed Dogs - Model(s): 930 -
Bin:22B-X Price: $ 22.50
http://sewing-machine-parts-store.co...bcat=Feed+Dogs
Thread
Thread Starter
Forum
Replies
Last Post
Justsosew
For Vintage & Antique Machine Enthusiasts
5
12-20-2016 05:18 PM
ButtercreamCakeArtist
Main
47
09-17-2007 05:49 PM