Collecting tips to make this Singer 28K run
12-08-2013, 07:48 AM
#32
Member
Thread Starter
Join Date: Dec 2013
Posts: 16
I'm presently reading this other thread:
http://www.quiltingboard.com/vintage...t43881-37.html
With 4303 pages, and say I read an average of 25 pages per day... I'll be through by June!
Tomorrow I'll be purchasing Singer machine oil (I only have a miniflask that came with my modern machine), denaturalized alcohol, linseed oil, and shellac. Wonder where I can find them. Probably at the hardware and craft store I buy paint, working tools and the like from.
There is in Spain something similar to Craig's List. Never used it, but my sister is addicted to it. She purchased there odd things like antique cast iron heaters, pieces of furniture and parts for them and so forth. I'll ask her.
Two blocks from my parents in law there is a Singer dealer and repair shop with one of these Old Sewing Machine Guys. He ofen gets vintage sewing machines from the people that purchase new ones, and he knows a lot. I've bought from him needles, attachments, bulbs etc for my modern machine, and he sure knows what it's about. Haven't seen any machine older than 40 years in his shop, though, but I haven't had a chance to look what's in its dusty dusky backroom.
http://www.quiltingboard.com/vintage...t43881-37.html
With 4303 pages, and say I read an average of 25 pages per day... I'll be through by June!
Tomorrow I'll be purchasing Singer machine oil (I only have a miniflask that came with my modern machine), denaturalized alcohol, linseed oil, and shellac. Wonder where I can find them. Probably at the hardware and craft store I buy paint, working tools and the like from.
There is in Spain something similar to Craig's List. Never used it, but my sister is addicted to it. She purchased there odd things like antique cast iron heaters, pieces of furniture and parts for them and so forth. I'll ask her.
Two blocks from my parents in law there is a Singer dealer and repair shop with one of these Old Sewing Machine Guys. He ofen gets vintage sewing machines from the people that purchase new ones, and he knows a lot. I've bought from him needles, attachments, bulbs etc for my modern machine, and he sure knows what it's about. Haven't seen any machine older than 40 years in his shop, though, but I haven't had a chance to look what's in its dusty dusky backroom.
12-08-2013, 08:01 AM
#33
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I'm presently reading this other thread:
http://www.quiltingboard.com/vintage...t43881-37.html
With 4303 pages, and say I read an average of 25 pages per day... I'll be through by June!
Tomorrow I'll be purchasing Singer machine oil (I only have a miniflask that came with my modern machine), denaturalized alcohol, linseed oil, and shellac. Wonder where I can find them. Probably at the hardware and craft store I buy paint, working tools and the like from.
There is in Spain something similar to Craig's List. Never used it, but my sister is addicted to it. She purchased there odd things like antique cast iron heaters, pieces of furniture and parts for them and so forth. I'll ask her.
Two blocks from my parents in law there is a Singer dealer and repair shop with one of these Old Sewing Machine Guys. He ofen gets vintage sewing machines from the people that purchase new ones, and he knows a lot. I've bought from him needles, attachments, bulbs etc for my modern machine, and he sure knows what it's about. Haven't seen any machine older than 40 years in his shop, though, but I haven't had a chance to look what's in its dusty dusky backroom.
http://www.quiltingboard.com/vintage...t43881-37.html
With 4303 pages, and say I read an average of 25 pages per day... I'll be through by June!
Tomorrow I'll be purchasing Singer machine oil (I only have a miniflask that came with my modern machine), denaturalized alcohol, linseed oil, and shellac. Wonder where I can find them. Probably at the hardware and craft store I buy paint, working tools and the like from.
There is in Spain something similar to Craig's List. Never used it, but my sister is addicted to it. She purchased there odd things like antique cast iron heaters, pieces of furniture and parts for them and so forth. I'll ask her.
Two blocks from my parents in law there is a Singer dealer and repair shop with one of these Old Sewing Machine Guys. He ofen gets vintage sewing machines from the people that purchase new ones, and he knows a lot. I've bought from him needles, attachments, bulbs etc for my modern machine, and he sure knows what it's about. Haven't seen any machine older than 40 years in his shop, though, but I haven't had a chance to look what's in its dusty dusky backroom.
OSMG may have some parts if he can find them. The same modern bobbin tires fit. You are very fortunate to have an old hand crank!!!
12-08-2013, 04:51 PM
#34
Member
Thread Starter
Join Date: Dec 2013
Posts: 16
I've also downloaded these pdf from Singer to indentify the missing parts and their references:
http://parts.singerco.com/IPpartCharts/27K_28K.pdf
http://parts.singerco.com/IPpartChar..._127K_128K.pdf
http://parts.singerco.com/IPpartCharts/27K_28K.pdf
http://parts.singerco.com/IPpartChar..._127K_128K.pdf
12-09-2013, 01:39 AM
#35
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
here is a link for repair manuals:
http://sewing-machines.blogspot.com/...e-manuals.html
scroll down and find the machine number you need.
http://sewing-machines.blogspot.com/...e-manuals.html
scroll down and find the machine number you need.
Last edited by miriam; 12-09-2013 at 01:44 AM.
12-09-2013, 04:46 AM
#36
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I got very brave this morning. I used the linseed oil and shellac on the machine. It is still wet:
[ATTACH=CONFIG]450922[/ATTACH]
[ATTACH=CONFIG]450923[/ATTACH]
It is still rough but I can see that the old shellac is starting to look a bit better.
I noticed that I can not let the rag go slack on my finger. My finger is much smaller than Glenn's so I was trying to make more area - don't bother - just go over and over it. I used a chop stick to drizzle the shellac out of the jar onto my rag.
[ATTACH=CONFIG]450922[/ATTACH]
[ATTACH=CONFIG]450923[/ATTACH]
It is still rough but I can see that the old shellac is starting to look a bit better.
I noticed that I can not let the rag go slack on my finger. My finger is much smaller than Glenn's so I was trying to make more area - don't bother - just go over and over it. I used a chop stick to drizzle the shellac out of the jar onto my rag.
12-09-2013, 05:31 AM
#38
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
There is quite a bit of just metal with no shellac on my machine. Glenn, does that Linseed oil ever dry? Should that be wiped off or just leave it and do more shellac/linseed oil? Should I add more linseed oil to the machine before I use more shellac? How soon after I have used the linseed oil/shellac can I use more shellac? Does it need to dry out first?
12-09-2013, 06:13 AM
#39
Member
Thread Starter
Join Date: Dec 2013
Posts: 16
There is no 28K manual on that link, but I downloaded 127/128's. That blog has also an interesting thread with how to start Learning about vintage sewing machines. Thanks for the tip!
I think Glenn wrote somewhere that it took some time for the linseed oil to dry out, but I don't remember where I read it! I've been surfing too many sites, blogs and forum threads so far.
I think Glenn wrote somewhere that it took some time for the linseed oil to dry out, but I don't remember where I read it! I've been surfing too many sites, blogs and forum threads so far.
12-09-2013, 06:47 AM
#40
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
There is no 28K manual on that link, but I downloaded 127/128's. That blog has also an interesting thread with how to start Learning about vintage sewing machines. Thanks for the tip!
I think Glenn wrote somewhere that it took some time for the linseed oil to dry out, but I don't remember where I read it! I've been surfing too many sites, blogs and forum threads so far.
I think Glenn wrote somewhere that it took some time for the linseed oil to dry out, but I don't remember where I read it! I've been surfing too many sites, blogs and forum threads so far.
Thread
Thread Starter
Forum
Replies
Last Post
GreyQ
For Vintage & Antique Machine Enthusiasts
9
02-12-2014 06:12 AM
Sideways
For Vintage & Antique Machine Enthusiasts
16
04-21-2013 01:42 PM
jillybean
Links and Resources
2
06-06-2012 08:23 PM
