dropping feed dogs on a Juki Industrial
10-11-2019, 06:36 PM
#1
Super Member
Thread Starter
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,524
dropping feed dogs on a Juki Industrial
Yes it can be done, but the users were not impressed when I told them they could use it for FMQ or embroidery.
[ATTACH=CONFIG]618430[/ATTACH]
[ATTACH=CONFIG]618430[/ATTACH]
10-13-2019, 08:01 AM
#3
Super Member
Thread Starter
Join Date: May 2016
Location: near Topeka kansas
Posts: 4,524
It is a DNU 1541S. Friends down the hall at work use it for modification of wheelchairs with extra padding for twisted bodies..
Something snapped the other day. 1/8" of needle was lost and the top of the machine no longer powered the bottom.
Reset button engaged the bobbin area, but not the opener arm. Still head scratchin.
Something snapped the other day. 1/8" of needle was lost and the top of the machine no longer powered the bottom.
Reset button engaged the bobbin area, but not the opener arm. Still head scratchin.
Thread
Thread Starter
Forum
Replies
Last Post
farmgirl_404
For Vintage & Antique Machine Enthusiasts
5
10-12-2012 06:30 AM
ButtercreamCakeArtist
Main
47
09-17-2007 05:49 PM
