Featherweight will not make thread loops
#1
Senior Member
Thread Starter
Join Date: Dec 2012
Location: Northern Ohio
Posts: 445
Featherweight will not make thread loops
I just got my first featherweight and it will not make the stitches.
I held on to the threads when I first started and it goes but does not make the stitches.
I think it might be the timing. Is that something I can fix or do I need to take it in for service? Any suggestions on where I take it? Also any ideas what I should expect to pay for this?
Thank you
I held on to the threads when I first started and it goes but does not make the stitches.
I think it might be the timing. Is that something I can fix or do I need to take it in for service? Any suggestions on where I take it? Also any ideas what I should expect to pay for this?
Thank you
#2
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
You will have to look in your manual. Which way does the needle go in? Which way does the thread pass through the needle? I'm sure someone will get on here and try to save you the trouble. It is good to look it up so you know for yourself. Your manual is your friend. It is unlikely it is out of time.
#5
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,572
Sounds to me that the needle is in backwards. If you did not get a manual, download a free one online. Make sure the needle is in correctly and the machine is threaded correctly. Chech the vintage section for help as well.
#6
Senior Member
Thread Starter
Join Date: Dec 2012
Location: Northern Ohio
Posts: 445
Thank you everyone for the suggestions.
I do have the manual, and have the needle in with the flat side to the left side, but I did not even think about it, I put the thread into the needle left to right, and it should be right to left.
I did read about the bobbin and making sure I have it over the top and the thread to the right, but will check that again.
Will try all the tips and let you know what happens.
THANKS!!!
I do have the manual, and have the needle in with the flat side to the left side, but I did not even think about it, I put the thread into the needle left to right, and it should be right to left.
I did read about the bobbin and making sure I have it over the top and the thread to the right, but will check that again.
Will try all the tips and let you know what happens.
THANKS!!!
#7
Senior Member
Thread Starter
Join Date: Dec 2012
Location: Northern Ohio
Posts: 445
Thank you to EVERYONE who helped me with my issue with the machine not sewing. I had threaded the needle backwards, I did have the flat side to the left, but had threaded it from left to right instead of right to left.
It works now. It was a little noisy so got out the manual and gave it a drink of oil in all the spots, and it is humming away!!!
It works now. It was a little noisy so got out the manual and gave it a drink of oil in all the spots, and it is humming away!!!
Thread
Thread Starter
Forum
Replies
Last Post