Free Singer 500A is a pain
#11
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Tammi,
Just watched your videos from the thread Miriam linked to. Honestly I've done all that several times, but I did enjoy the videos.
Now I've got to go wiggle the pieces on my machine and see if they do what they are supposed to do.
Joe
Just watched your videos from the thread Miriam linked to. Honestly I've done all that several times, but I did enjoy the videos.
Now I've got to go wiggle the pieces on my machine and see if they do what they are supposed to do.
Joe
#13
Super Member
Thread Starter
Join Date: Feb 2012
Posts: 8,091
Yes it was.
I got the offending parts freed up. I should remember to listen to Miriam when she tells me what to do. She was right the whole time. I ended up using break clean on the horizontal plungers as I manually moved the needle bar back and forth. It took a bit of doing but the break cleaner did what the other things I tried didn't.
Now I'm gonna hose all the innards with break clean to get rid of all the old oil. Then start from scratch with Tri-Flow.
Joe
I got the offending parts freed up. I should remember to listen to Miriam when she tells me what to do. She was right the whole time. I ended up using break clean on the horizontal plungers as I manually moved the needle bar back and forth. It took a bit of doing but the break cleaner did what the other things I tried didn't.
Now I'm gonna hose all the innards with break clean to get rid of all the old oil. Then start from scratch with Tri-Flow.
Joe
#14
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I have spent 8 or more hours on one of those stacks and then only made a few dollars for my time. It's why I like the 403 and the 503 better - I've never had one of those all gunked up like the 401 or the 500. I sure wonder what they were using for oil back in the day. When that stuff sets it sets up like glue.
Thread
Thread Starter
Forum
Replies
Last Post
annalee
For Vintage & Antique Machine Enthusiasts
11
10-30-2012 08:40 PM
Lostn51
For Vintage & Antique Machine Enthusiasts
3
08-21-2010 10:44 PM
KellyK
Main
8
08-07-2010 12:39 PM