good housekeeper model 205
#1
Member
Thread Starter
Join Date: Nov 2014
Location: Tacoma wa
Posts: 2
good housekeeper model 205
I have a good housekepper model 205 and am wondering where and what kind of bobbin holder I should get. Im at a loss and have exhausted all logical internet searches. Any help would be greatly appreciated. Thank, Ericah[ATTACH=CONFIG]499606[/ATTACH][ATTACH=CONFIG]499607[/ATTACH][ATTACH=CONFIG]499608[/ATTACH]
#2
your picture does not show the "important" part. It's class 15, easy enough, but it is left or right hook.
though just about all except Singer is this way
So you need to look at that little notch at the top
Oh wait, your machine missing that part, you need a bit more than just the bobbin case.
You need these pieces to make this machine work. Though these are Singer, but you get the idea. Yours has the swing clips to hold the retainer in place, so you'll need to look for that style retainer, Singer had a different type (it's the lower middle piece with the screw)
your best bet will be to check out goodwill and thrift for a machine with the bobbin assembly similar to yours that has the parts - and swap them out. It does not have to have the same name on the front, and may even look very different on the top side, but that won't matter as long as these parts fit.
though just about all except Singer is this way
So you need to look at that little notch at the top
Oh wait, your machine missing that part, you need a bit more than just the bobbin case.
You need these pieces to make this machine work. Though these are Singer, but you get the idea. Yours has the swing clips to hold the retainer in place, so you'll need to look for that style retainer, Singer had a different type (it's the lower middle piece with the screw)
your best bet will be to check out goodwill and thrift for a machine with the bobbin assembly similar to yours that has the parts - and swap them out. It does not have to have the same name on the front, and may even look very different on the top side, but that won't matter as long as these parts fit.
Last edited by Macybaby; 11-19-2014 at 08:06 PM.
#3
I had one very similar, the badge says Dressmaker. Macybaby showed you the right bobbin case. It is common, get the parts she shows. A local sewing shop may have parts machine they can get them from. I have a .pdf copy of the manual I can email to you. PM me with your email address and I will get it to you. I am just heading out of town so it could be a couple of days.
[ATTACH=CONFIG]499622[/ATTACH]
[ATTACH=CONFIG]499622[/ATTACH]
Last edited by Skyangel; 11-19-2014 at 11:32 PM.
#4
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Here is a bit more info on those Japanese machines:
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
#5
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
Here is a bit more info on those Japanese machines:
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
#7
Super Member
Join Date: Aug 2010
Location: Kansas City, Missouri
Posts: 1,040
Cathy, as usual I nearly always learn something from your posts. I did not know or even think to check for a left or right hook on the class 15 bobbin case. Thanks so much for this information. It will go into my sewing machine info file.
#10
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Here is a bit more info on those Japanese machines:
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
http://www.quiltingboard.com/vintage...s-t207877.html There may be a generic manual link on there, too.
It is more likely to be a right bobbin holder than a left. You will need to get the larger needle slot since it is a zig zager. I would check with sew-classic for a bobbin case - I think you are looking at less than $10. She also has attachments. (you will need to determine if you have short shank or long shank) Then she has decent bobbins.
Since it's an end loader she doesn't need the wide slot bobbin case. The whole hook assembly moves back and forth with the needle so the needle only enters one spot in the bobbin case.
Cari
Thread
Thread Starter
Forum
Replies
Last Post
foufymaus
For Vintage & Antique Machine Enthusiasts
18
05-29-2016 12:34 PM
manley
For Vintage & Antique Machine Enthusiasts
2
05-21-2011 11:51 AM