Help with Singer 15-91, Please?
#11
Super Member
Join Date: Sep 2015
Posts: 1,963
Stucks screws and parts in general it's about patience, oil, more oil and various spray can stuff like PB blaster can make a differece too. The ideal scew driver fits the groove in the screw perfectly and has a sturdy solid handle. I bought a 201 a couple of years a go (three years this autumn). It has a screw in the bottom center below the bobbin case. I could never get it out, and I didn't want to force it too much, which meant I let it be but I oiled it regularly since there's an oil point there. Now and then I tried to loosen it, and a couple of weeks ago it was loose, no effort at all, just gently turning the screw driver all the way. I know it will loosen with a bit of oil and wiggeling it now and then. Since your machine has the direct drive gear and potted motor I'm guessing your machine will need cleaning and lubrication behind there.
I might have misunderstood you a bit in the initial post, but I see you are all onto it. Very odd about wasp nests, but you are not alone. I think read somone found a mouse nest in a cabinet a year or so ago.
I might have misunderstood you a bit in the initial post, but I see you are all onto it. Very odd about wasp nests, but you are not alone. I think read somone found a mouse nest in a cabinet a year or so ago.
Last edited by Mickey2; 07-24-2017 at 12:24 PM.
#12
Super Member
Join Date: Mar 2016
Posts: 2,860
I had to laugh! I have to borrow a saying: "Re-doing old sewing machines ain't for sissies." I don't envy you on that one.
What I would do is put it on it's faceplate in a way that it doesn't rest on the tension or thread take up lever. I would try a paperback book (or 2), or a brick, or maybe a big roll of packing tape - anything that the faceplate can rest on that will keep the tension and thread take up lever not resting on anything. I just did a demo photo. It's not a 15-91, but it shows what I'm talking about. It has a knob on the faceplate and that was what was on my bench today. Just make sure that you don't bend anything on the face. Then drop your oil on that screw and blow it on high with a hairdryer the next day and see if it moves. (I've even heard of putting an oiled machine in your car in the sun.)
bk
What I would do is put it on it's faceplate in a way that it doesn't rest on the tension or thread take up lever. I would try a paperback book (or 2), or a brick, or maybe a big roll of packing tape - anything that the faceplate can rest on that will keep the tension and thread take up lever not resting on anything. I just did a demo photo. It's not a 15-91, but it shows what I'm talking about. It has a knob on the faceplate and that was what was on my bench today. Just make sure that you don't bend anything on the face. Then drop your oil on that screw and blow it on high with a hairdryer the next day and see if it moves. (I've even heard of putting an oiled machine in your car in the sun.)
bk
Last edited by bkay; 07-24-2017 at 12:57 PM. Reason: wrong word
#13
[ATTACH=CONFIG]577167[/ATTACH]These mud daubers were very busy. all the way up the pillar, turned at the driveshaft, and went behind the faceplate. Turning now , but I still can't get it to spin freely. One day. Machine from Marion County KS.
and Congrats on you patience Micky2
and Congrats on you patience Micky2
#15
Ha, I can certainly put it in my truck in the sun tomorrow, bkay! With this heat we have been having lately, if I was a screw I would come loose so fast just so I could be brought back into the AC house! Lol!
I've been putting drops of oil on the screw all day, so hopefully I get some progress before three years pass like Micky! If my DH has time after work today, I'll see if he can maybe pick up some PBblaster for me on his way home. I really appreciate all your help and encouragement. Honestly, I probably would have given up by now without the QB members. Thanks everyone!!
I've been putting drops of oil on the screw all day, so hopefully I get some progress before three years pass like Micky! If my DH has time after work today, I'll see if he can maybe pick up some PBblaster for me on his way home. I really appreciate all your help and encouragement. Honestly, I probably would have given up by now without the QB members. Thanks everyone!!
#16
[ATTACH=CONFIG]577167[/ATTACH]These mud daubers were very busy. all the way up the pillar, turned at the driveshaft, and went behind the faceplate. Turning now , but I still can't get it to spin freely. One day. Machine from Marion County KS.
and Congrats on you patience Micky2
and Congrats on you patience Micky2
#17
I don't know if you have seen these, but they are very good links for the potted motor and screwdrivers -
http://vssmb.blogspot.com/2011/07/ge...g-on-your.html
http://vssmb.blogspot.com/2011/12/ho...rt-1-wire.html
Depending on the machine, I might be tempted to power wash for mud daubers. I've been fortunate and not found anything other than dried oil and lint in my machines. I'm not sure how I would handle if found what this person did -> http://sewingrepairblog.com/you-can-call-me-batman
Janey - Neat people never make the exciting discoveries I do.
http://vssmb.blogspot.com/2011/07/ge...g-on-your.html
http://vssmb.blogspot.com/2011/12/ho...rt-1-wire.html
Depending on the machine, I might be tempted to power wash for mud daubers. I've been fortunate and not found anything other than dried oil and lint in my machines. I'm not sure how I would handle if found what this person did -> http://sewingrepairblog.com/you-can-call-me-batman
Janey - Neat people never make the exciting discoveries I do.
#18
I don't know if you have seen these, but they are very good links for the potted motor and screwdrivers -
http://vssmb.blogspot.com/2011/07/ge...g-on-your.html
http://vssmb.blogspot.com/2011/12/ho...rt-1-wire.html
Depending on the machine, I might be tempted to power wash for mud daubers. I've been fortunate and not found anything other than dried oil and lint in my machines. I'm not sure how I would handle if found what this person did -> http://sewingrepairblog.com/you-can-call-me-batman
Janey - Neat people never make the exciting discoveries I do.
http://vssmb.blogspot.com/2011/07/ge...g-on-your.html
http://vssmb.blogspot.com/2011/12/ho...rt-1-wire.html
Depending on the machine, I might be tempted to power wash for mud daubers. I've been fortunate and not found anything other than dried oil and lint in my machines. I'm not sure how I would handle if found what this person did -> http://sewingrepairblog.com/you-can-call-me-batman
Janey - Neat people never make the exciting discoveries I do.
Oh, and concerning finding a bat in a machine, I'll take an old wasp nest any day!!
#19
A more drastic solution could include drilling out the old set screw. If you are lucky enough to have access to left handed drill bits they would try to unscrew it as they drill it. if not, you risk messing up the threads in the knurled knob. They can be re threaded, but perhaps it may need a bigger set screw. Other options exist, but they aren't fun either. Patience is a virtue. Thankfully you are working on a common knob so parts do exist.
#20
I'm worried now, leonf. Do you think I might not be able to get it off because it is stripped? I'm trying everything suggested here. The room smells like PBblaster! If I can't get this screw off, I can't do any repairs at all, as this is the only way to get into the potted motor.
Thread
Thread Starter
Forum
Replies
Last Post
kiffie2413
For Vintage & Antique Machine Enthusiasts
17
06-28-2017 12:53 PM
miriam
For Vintage & Antique Machine Enthusiasts
154
03-12-2014 07:43 AM
Crissie
General Chit-Chat (non-quilting talk)
12
11-21-2009 08:50 PM