Husqvarna 6440
#1
Member
Thread Starter
Join Date: Jul 2018
Posts: 89
Husqvarna 6440
Not sure if this qualifies as vintage, as it is the newest machine that I have by far, but I am really impressed! When I received it the reverse button was stuck in and the width dial was frozen, with the roll pin inside the dial sheared off. A couple of days of patient cleaning, oiling, and gently working it, and a simple roll pin, and it purrs like a kitten! One question though. Will the G-K cams that came with some of the other 6000 series work in the 6440?
Thanks
Jim
[ATTACH=CONFIG]604276[/ATTACH]
Thanks
Jim
[ATTACH=CONFIG]604276[/ATTACH]
#2
Super Member
Join Date: Sep 2015
Posts: 1,963
I think they do, all cam cassettes (the round knobs) marked system colormatic will work in the 6000 series. Could the G to K cams be bought separately for some models? If your model have 6 millimeter stitch width it should work ideally, but I don't now for the models that have 4 mm. I just read some of the models taking these cam sets only have 4 millimeter stitch width. It might put the decorative stitches slightly out of balance. I thought all had the same standard stitch width until know.
Last edited by Mickey2; 11-22-2018 at 02:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post