Looking for Bobbins
#1
Looking for Bobbins
Hi, I am looking for good, usable bobbins for a Singer Model 66 made in 1907. It has the lotus pattern decals on it, if that makes a difference. It sat on a shelf for 12 years after someone gave it to us. It didn't run. But very recently we took it to a fellow and now it runs great. Decals are a little worse for wear, but then, if I was 105 years old, I would be too. I will be checking back often. Thanks
#2
Super Member
Join Date: Feb 2012
Posts: 8,091
JoAnns has Dritz Class 66 bobbins. They're good.
Sew-Classic has them as well and I've purchased some and the quality is good.
http://shop.sew-classic.com/
Joe
Sew-Classic has them as well and I've purchased some and the quality is good.
http://shop.sew-classic.com/
Joe
#3
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Buy them from Sew Classic as the ones from the big box stores are junk, IMO. And as Miriam says "only good for making earrings". LOL. I think they test the bobbins at Sew Classic, buy you can e-mail them and ask.
#4
Senior Member
Join Date: Oct 2011
Location: Middle Tennessee
Posts: 360
I agree with Joe, Sew Classics has given us very good service, ships fast and takes Pay Pal. We order all our parts from them. I use both plastic and steel bobbins without issue. The plastic ones are quieter and won't wear as much.
I learned to sew with the steel ones back in the 60s. 66 bobbins are the most common ones and can be found locally. Don't forget to oil your machine and change the grease, if it has hardened inside the machine. It will last a lot longer. We're all they have, so be good to them. You will be collecting vintage machines in no time. It is addective.
I learned to sew with the steel ones back in the 60s. 66 bobbins are the most common ones and can be found locally. Don't forget to oil your machine and change the grease, if it has hardened inside the machine. It will last a lot longer. We're all they have, so be good to them. You will be collecting vintage machines in no time. It is addective.
#6
I'm excited to have her. At some point, someone put a motor on her and she has had all the old grease and oil cleaned out and new added. She also has her own table, but it isn't as old as she is. Thanks for all the info on the bobbins.
#7
Power Poster
Join Date: Mar 2011
Location: Somewhere
Posts: 15,506
I got some of the bobbins from the big box store and they fell apart - I don't know how to make them come apart though. I used the flat sides from a couple to make earrings for DIL. She thought they were pretty cool. The bobbins from sew-classic work just fine for sewing - no earrings from them yet.
#8
Super Member
Join Date: Feb 2012
Posts: 8,091
There are several versions of bobbins.
A: The first was a one piece bobbin turned out of solid stock on a lathe.
B: Next was the two piece unit stamped out of sheet metal then joined in the middle.
C: Then was the three piece with a solid middle.
D: Followed by the three piece bobbin with a rolled middle. I've seen some that were welded and some with the middle just haphazardly rolled to a tube shape.
E: Plastic ones.
All of the three piece units are put together by the center tube being inserted into the disc then the end flared over.
I've not had any fall apart yet, but I've had them crooked and warped right out of the box.
I love it when I can come up with the older ones. They work really good.
A: The first was a one piece bobbin turned out of solid stock on a lathe.
B: Next was the two piece unit stamped out of sheet metal then joined in the middle.
C: Then was the three piece with a solid middle.
D: Followed by the three piece bobbin with a rolled middle. I've seen some that were welded and some with the middle just haphazardly rolled to a tube shape.
E: Plastic ones.
All of the three piece units are put together by the center tube being inserted into the disc then the end flared over.
I've not had any fall apart yet, but I've had them crooked and warped right out of the box.
I love it when I can come up with the older ones. They work really good.
#9
J Miller,
Thanks for taking the time to put together this information along with good photos. Who ever knew there would be so many ways to make the same but different bobbin for one machine.
Now I'm curious and will be checking out all the bobbins that came with my various machines.
best,
d
QUOTE=J Miller;5086580]There are several versions of bobbins.
A: The first was a one piece bobbin turned out of solid stock on a lathe.
B: Next was the two piece unit stamped out of sheet metal then joined in the middle.
C: Then was the three piece with a solid middle.
D: Followed by the three piece bobbin with a rolled middle. I've seen some that were welded and some with the middle just haphazardly rolled to a tube shape.
E: Plastic ones.
All of the three piece units are put together by the center tube being inserted into the disc then the end flared over.
I've not had any fall apart yet, but I've had them crooked and warped right out of the box.
I love it when I can come up with the older ones. They work really good.[/QUOTE]
Thanks for taking the time to put together this information along with good photos. Who ever knew there would be so many ways to make the same but different bobbin for one machine.
Now I'm curious and will be checking out all the bobbins that came with my various machines.
best,
d
QUOTE=J Miller;5086580]There are several versions of bobbins.
A: The first was a one piece bobbin turned out of solid stock on a lathe.
B: Next was the two piece unit stamped out of sheet metal then joined in the middle.
C: Then was the three piece with a solid middle.
D: Followed by the three piece bobbin with a rolled middle. I've seen some that were welded and some with the middle just haphazardly rolled to a tube shape.
E: Plastic ones.
All of the three piece units are put together by the center tube being inserted into the disc then the end flared over.
I've not had any fall apart yet, but I've had them crooked and warped right out of the box.
I love it when I can come up with the older ones. They work really good.[/QUOTE]
#10
Super Member
Join Date: May 2010
Location: Round Rock,Texas
Posts: 6,135
Don't buy the Dritz bobbins, the hole for the bobbin winder is too small and often the quality of these bobbins isn't very good. I only use vintage bobbins in my Singers 99,353,201 and 66 machines, several years ago I won an Ebay auction for 35 vintage class 66 bobbins; have plenty of bobbins for my machines now.
I've tried the newer repros and its just not as smooth.
Sharon W. in Texas
I've tried the newer repros and its just not as smooth.
Sharon W. in Texas
Thread
Thread Starter
Forum
Replies
Last Post
rryder
Main
8
11-27-2018 09:10 PM
lyndaj
For Vintage & Antique Machine Enthusiasts
6
02-09-2016 10:10 PM